Scotch-Brite™ SR Radial Bristle Disc, 2 in x 3/8 in, 10/Carton, 40 ea/Case (Case of 40) SKU 7000000770
Removes Unwanted Coatings
When used at recommended operating speeds, our Scotch-Brite™ SR Radial Bristle Disc removes thin layers of sealants, silicones, RTVs and adhesives from most surfaces without removing the underlying paint or coating. Bristle products have no hard edges the way other wheel products do, so they can be compressed to fit into curves and hollows without inducing damaging gouges and trails on the work piece.
Conforms to the Substrate
The Scotch-Brite™ SR Radial Bristle Disc has flexible bristles that conform to the part, creating an incredibly uniform finish even around protrusions, detail grooves, patterns and other hard-to-reach areas. It replaces hand scraping, which means less operator fatigue and less time spent on rework. The SR Radial Bristle Disc also eliminates the need for harsh chemicals, which means there's no need for specialized ventilation or cleanup equipment. Both the 3M™ SR Cutter and the SR Radial Bristle Disc remove sealants from substrates. However, the SR Cutter is designed to remove thick coatings while the SR Radial Bristle Disc is designed to remove thin coatings.
Roloc™ Attachment for Easy Swap Out of Discs
Our Scotch-Brite™ SR Radial Bristle Disc comes with Roloc™ attachment accessories, including plastic Roloc™ buttons and holders. These buttons and holders were designed to make fastening the disc to portable hand tools like right angle grinders and straight grinders quick and easy. With 1/2 turns, operators can quickly attach or detach the disc to the grinder, making for fast changeouts between discs. The Scotch-Brite™ SR Radial Bristle Disc can also be used with a variety of 3M™Mandrels to adjust widths and tailor the size to meet project needs. Minimal pressure and force is needed with Bristle Discs - the aggressive cutting action, responsive bristle design and power of the tool combine to do the work for you.
An Alternative to Compounds and Hand Scraping
Critical maintenance and repair tasks often depend on effective seam sealant removal. This task is often an integral part of every mechanic's job. Until now, there were limited choices for removing seam sealant. One was to use chemical solvents, which raise health, safety and environmental concerns. Solvents take time to work, and can be messy to clean up. The other choice for removing seam sealant was hand scraping, which is slow, expensive, and inconsistent. Scraping by hand may also lead to repetitive-motion stress injuries. In addition, some scraping tools can damage the surfaces under the seam sealant. Wire brushes, for example, can aggressively cut aluminum and weaken the integrity of the part. With our Scotch-Brite™ SR Radial Bristle Disc, operators can safely and effectively remove sealants while still maintaining the integrity of the part.
- Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
- IndustryIB
- Marketplace Formal NameScotch-Brite™ SR Radial Bristle Disc, 2 in x 3/8 in, 10/Carton, 40 ea/Case (Case of 40) SKU 7000000770
- Estimated Lead Time2
- Manufacturer3M
- SAP7000000770
- 3M ID61500175783
- UPC00048011300979
- Product Formal NameScotch-Brite™ SR Radial Bristle Disc, 2 in x 3/8 in, 10/Carton, 40 ea/Case (Case of 40) SKU 7000000770
- BrandScotch-Brite
- Case UnitCase of 40
- Unit of MeasureEach
- Size2 in x 3/8 in
- Diameter2 in
- ColorCream
- Inventory Status CodeS
- Country of OriginUSA
- Return PolicyNo Return
- Width2 in
- Length3/8 in
- Transportation
- ECCN NumberEAR99
- Harmonized Tariff Schedule Number9603500000
- UNSPSC Code31191500
- United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
- United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
- NMFC Item124790
- NMFC Class060.0
- NMFC Sub00
- Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
- International Air Transport AssociationNOT REGULATED
- International Maritime OrganizationNOT REGULATED
- Flashpoint TransportNo Flash Point
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.


