• 0
CUNO™ CTG-Klean System with Betafine™ DP Series Cartridges 1GPK1DP09025, 2.5UM ABS, 1 in x 1 in, 6 Per Case

CUNO™ CTG-Klean System with Betafine™ DP Series Cartridges 1GPK1DP09025, 2.5UM ABS, 1 in x 1 in, 6 Per Case

CUNO™ CTG-Klean System Filter Pack with Betafine™ DP Series Filter Cartridges was designed as part of a totally enclosed system that uses a separate pressure vessel and disposable filter pack to isolate the product being filtered from the housing. It reduces time, labor and operator exposure to impurities and cleaning solvents involved in filter change-outs and cleaning of conventional housings.
Betapure
Price: $1304.31

(This price is for a MOQ of 2 cases of 6 Each)

Estimated Lead Time is 90 working days.
  • $1304.31
    • Case of 6 - $1304.31
Qty:  
OR
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    Learn more
    • Weight
      3.372 lbs
    • SKU
      7010415440
    • UPC/ISBN
      00016145210839
  • Industry
    HC
  • Lead Time
    90
  • Manufacturer
    3M
  • SAP
    7010415440
  • 3M ID
    70020229301
  • UPC
    00-16145-21083-9
  • Product Formal Name
    CUNO™ CTG-Klean System with Betafine™ DP Series Cartridges 1GPK1DP09025, 2.5UM ABS, 1 in x 1 in, 6 Per Case
  • Brand
    Betapure, CUNO
  • Case Unit
    This price is for a MOQ of 2 cases of 6
  • Unit of Measure
    Each
  • Estimated Lead Time
    90
  • Inventory Status Code
    N
  • Country of Origin
    USA
  • Return Policy
    No Return
  • Box Length (in)
    13.625
  • Box Width (in)
    9.375
  • Box Height (in)
    15.750
  • Bullets
    • Bullet 1
      - Cartridge pack design reduces the time and labor involved with filter change-outs and cleaning of conventional housings
      - Totally enclosed filter pack avoids handling of used filter cartridges
      - Design reduces gaskets, posts, spring and seal assemblies, and seal plates for efficient and time saving filter installation and removal
      - Filter pack can be capped and reused, depending on the application
      - Rapid filter change-out reduces labor time
      - 3M™ Betafine™ DP Series pleated polypropylene filters are available with absolute ratings from 0.2 to 70 microns
      - 3M™ Betafine™ DP Series pleated polypropylene filters are used extensively on corrosive and non-corrosive process fluids where broad chemical compatibility is required
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      8421290065
    • UNSPSC Code
      47101500
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      069095
    • NMFC Class
      175.5
    • NMFC Sub
      02
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7010415440
  • UPC/ISBN
    00016145210839

The CUNO™ CTG-Klean System was designed with versatility in mind to accommodate a wide variety of filter media and offers compatibility with a range of fluids to meet a variety of process requirements. Our line of 3M™ Betafine™ DP Series filters cartridges are ideally suited for high flow, low viscosity fluids. The 3M™ Betafine™ DP Series Filter DifferenceThese filters are used extensively on corrosive and non-corrosive process fluids where broad chemical compatibility is required. Our line of 3M™ Betafine™ DP Series filter cartridges are ideally suited for high flow, low viscosity fluids. The high surface area of the pleated filter matrix offers increased flow, high contaminant loading capacity and low initial pressure drop. 3M™ Betafine™ DP Series filter construction is optimized to obtain high flow rates while maintaining the defined particle reduction efficiencies. Each filter cartridge is manufactured from 100% polypropylene and pleated for increased surface area. We manufacture 3M™ Betafine™ DP Series filter cartridges from 100% polypropylene. The Power of Pleated PerformanceOur engineered, absolute rated, pleated filter provides dependable, repeatable filtration, improving effluent quality and helping provide consistent performance. The nature of pleated media also constitutes a greater surface area in less physical space and provides a longer service life compared to non-pleated media. Greater surface area leads to fewer filter change-outs and lower total filtration operating costs. Streamlined, Long-Life, High-PerformanceOur cartridge pack design reduces the extensive time and labor involved with filter change-outs and cleaning of conventional housings, thereby reducing operator exposure to product cleaning solvents. This streamlined system, coupled with high performance, long-life filters, makes CUNO™ CTG-Klean System the clear choice for cost-effective filtration. In some applications, hold up volume can be recovered from the system and used filter packs can be capped and stored for repeated use, lowering costs.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.