3M™ Zeta Plus™ H Series Filter Cartridge 4523701A 30H, 12 in, 16 Cell, Nitrile, 2 Per Case

Our Zeta Plus™ H Series Filter Cartridges utilize a charge-modified depth filter media with high-tensile strength, which performs efficiently under elevated operating temperatures or repeated hot water sanitation cycles. In addition to the mechanical exclusion of particles via depth loading, the filter media adsorbs contaminants too small for mechanical straining alone.
Price: $776.18

(Case of 2 Each)

Estimated Lead Time is 180 working days.
  • $776.18
  • Case of 2 - $776.18
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      20.28 lbs
    • SKU
      7000125517
    • UPC/ISBN
      00016145095351
  • Lead Time
    180
  • Manufacturer
    3M
  • SAP
    7000125517
  • 3M ID
    70020072115
  • Product Formal Name
    3M™ Zeta Plus™ H Series Filter Cartridge 4523701A 30H, 12 in, 16 Cell, Nitrile, 2 Per Case
  • Brand
    Zeta Plus
  • Case Unit
    Case of 2
  • Unit of Measure
    Each
  • Estimated Lead Time
    180
  • Inventory Status Code
    N
  • Technical Information
    https://multimedia.3m.com/mws/media/493983J/zeta-plustm-h-series-depth-filter.jpg
  • Country of Origin
    USA
  • Return Policy
    No Return
  • Box Length (in)
    23.500
  • Box Width (in)
    11.750
  • Box Height (in)
    11.875
  • Bullets
    • Bullet 1
      - High wet-tensile strength filter media withstands multiple steaming and hot water sanitization cycles
      - Extended filter life provides high throughputs, fewer change-outs and reduced operating costs over conventional plate and frame filters
      - Depth filtration and electrokinetic adsorption provide efficient haze and particle reduction at micron ratings smaller than the mechanical rating alone
      - Variety of cartridge sizes offer flexible options for flow requirements
      - All Components are FDA CFR 21 listed for use with food & beverage filter applications
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      8421290065
    • UNSPSC Code
      47101500
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      069095
    • NMFC Class
      100.0
    • NMFC Sub
      03
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7000125517
  • UPC/ISBN
    00016145095351

We manufacture Zeta Plus™ H Series Filter Cartridges in 8, 12, and 16 inch diameter, providing filtration surface areas from 2.8 ft to 34.7 ft per cartridge. With a combination of depth filtration and electro-kinetic adsorption, our cartridge provides efficient haze and particle reduction at micron ratings lower than the mechanical rating alone.Cartridge ConstructionA single Zeta Plus H series filter cartridge is composed of an assembly of Zeta Plus filter cells. Each cell is composed of two Zeta Plus H Series filter media discs on either side of a polypropylene stiff cell" separator. The discs are sealed together at the circumference by an injection-molded polypropylene edge seal to form a cell. We then unitize the cells into a cartridge, using set compression that results in a rugged, durable construction. The cells are held in place by three stainless steel bands in the core of the cartridge. We manufacture Zeta Plus cartridges in a variety of sizes and number of cell combinations. Zeta Plus™ Filter Cartridge System vs. Plate & Frame Filter EconomicsOur Zeta Plus filter cartridge system offers number of advantages over conventional plate and frame filters. Since the cartridge system is contained in a totally enclosed housing, there is no product leakage and no exposure of the filter media to external contamination, allowing for effective use of the media, higher throughputs, and low operating costs. In competing plate and frame filter press designs, the filter material is open to the environment, making both filter media and product susceptible to external contamination. Their open" design requires more frequent media change-out cycles, typically every few days. This results are lower throughputs and higher material, labor and operating costs. Plate and frame filters are labor-intensive, requiring two people four to eight hours to change out the media. Zeta Plus filter cartridges are easy to install and remove, usually taking about 15 minutes, netting you significantly less labor cost and allowing you to focus on the work, not the equipment. The savings become substantial when considering the floor space reduction of the vertical Zeta Plus housing design and a typical 50% or greater decrease in initial capital cost when compared to a comparable plate and frame filter. Zeta Plus H series filter cartridges demonstrate important benefits in terms of effectiveness and operational cost savings:Effective Particle ReductionAvailable in a Range of Media GradesSuperior Strength and ResistanceHigh Performance in Microbial ReductionLow Extractables Applications The Zeta Plus H series filter cartridge is ideally suited for clarification and pre-filtration in food and beverage, cosmetic, and general applications where its exceptional high wet-tensile strength media provides extended service life. These include aqueous, alcoholic, proteinaceous, and acidic solutions.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.