3M™ Zeta Plus™ 40Q Series Filter Cartridge 4524501E40Q, 16 Cell, PTFE, 2 Per Case
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryHC
-
Lead Time180
-
Manufacturer3M
-
SAP7010411036
-
3M ID70020161181
-
UPC00-16145-15579-6
-
Product Formal Name3M™ Zeta Plus™ 40Q Series Filter Cartridge 4524501E40Q, 16 Cell, PTFE, 2 Per Case
-
BrandZeta Plus
-
Case UnitCase of 2
-
Unit of MeasureEach
-
Estimated Lead Time180
-
Inventory Status CodeN
-
Technical Informationhttps://multimedia.3m.com/mws/media/499566J/zeta-plus-40q-purifier-cartridges-specification-sheet.jpg
-
Country of OriginUSA
-
Return PolicyNo Return
-
Box Length (in)23.500
-
Box Width (in)11.750
-
Box Height (in)11.875
- Bullets
-
Bullet 1- filters metallic ion contaminants from High purity chemicals, such as resins, photoresists, and solvents
- reduces trace metals to Single-digit ppb levels
- graded density construction increases contact time between the fluid and reactive sites of the purifier cartridge
- High flow rates provide Increased throughputs as compared to ion exchange columns
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number8421290065
-
UNSPSC Code40161500
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item069100
-
NMFC Class070.0
-
NMFC Sub09
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint TransportNo Flash Point
-
-
SKU7010411036
-
UPC/ISBN00016145155796
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.