:
from
to
Clear
Clear
3M™ VentureClad™ Insulation Jacketing Tape 1577CW-WM, White, 23 in x 50 yd, 1 Roll/Case (Case of 1) SKU 7100043741
SKU: 7100043741
Zero Permeability Cladding and Jacketing
The white aluminum exterior provides an attractive aesthetic for cladding that is visible when finished while also providing excellent chemical resistance. It provides zero permeability and acts as a vapor barrier for insulation cladding and jacketing applications. This tape was tested in accordance with ASTM E84. The self-adhesive material cuts and installs easily on-site and without the use of special tools. The backing is flexible to conform to curved and irregular surfaces with ease. 3M™ VentureClad™ Insulation Jacketing Tape 1577CW-WM meets or exceeds most building code requirements – for more information on specific approvals, please refer to the technical data sheet.
Adheres in Cold Temperatures
3M™ VentureClad™ Insulation Jacketing Tape 1577CW-WM features an aggressive pressure sensitive acrylic adhesive that bonds and seals well in cold temperatures. This adhesive adheres immediately on contact to a variety of materials such as fiberglass, faced fiberglass insulation, mineral wool, polystyrene and flexible aerogel. It applies easily at temperatures as cold as -10°F/-23°C. It can operate at a service temperature as low as -94°F/-70°C and as high as 300°F/149°C. Once bonded, this tape will provide good holding power for extended periods with good aging properties and resists lifting and curling over time.
This product is used to protect insulation against UV, ozone, high humidity, salt spray, weather, oil and grease, aggressive chemicals, impact and mechanical abuse, corrosion under insulation (CUI), and moisture vapor intrusion. It works well with many insulation types. Qualifies for compliance credit for LEED®. Additionally, it meets the FDA compositional requirements for indirect food contact.
Recommended Applications
- Vapor barrier for insulation cladding and jacketing operations such as HVAC ductwork and piping
- Interior and exterior ductwork (rectangular/round), pipes (straight runs, bends, intersections), and vessels
- Weather protection system in extreme environmental conditions
The Science of Better Adhesion from 3M
Since 1925 when one of our lab assistants invented masking tape, 3M has been applying science to life – developing adhesive products and technologies that help entire industries and individual businesses worldwide. The work that began with a single 3M engineer now spans decades and generations. And all of it goes into each of our industrial tapes and adhesives, like 3M™ VentureClad™ Insulation Jacketing Tape 1577CW-WM, to help businesses like yours operate faster, better and more efficiently.
- Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
- IndustryIB
- Marketplace Formal Name3M™ VentureClad™ Insulation Jacketing Tape 1577CW-WM, White, 23 in x 50 yd, 1 Roll/Case (Case of 1) SKU 7100043741
- Lead Time70
- Manufacturer3M
- SAP7100043741
- 3M ID70008909247
- UPC00051128957820
- Product Formal Name3M™ VentureClad™ Insulation Jacketing Tape 1577CW-WM, White, 23 in x 50 yd, 1 Roll/Case (Case of 1) SKU 7100043741
- BrandVentureClad
- Case UnitCase of 1
- Unit of MeasureRoll
- Product ID1577CW-WM
- Estimated Lead Time70
- Size - Imperial23 in x 50 yd
- ColorWhite
- Inventory Status CodeS
- Country of OriginUSA
- Return PolicyNo Return
- Width23 in
- Length50 yd
- Transportation
- ECCN NumberEAR99
- Harmonized Tariff Schedule Number7607205000
- UNSPSC Code31201500
- United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
- United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
- NMFC Item013750
- NMFC Class070.0
- NMFC Sub00
- Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
- International Air Transport AssociationNOT REGULATED
- International Maritime OrganizationNOT REGULATED
- Flashpoint TransportNo Flash Point
3M™ VentureClad™ Insulation Jacketing System 1577CW-WM is used for cladding and jacketing applications and creates a vapor barrier for HVAC, ductwork, vessels and pipes. This conformable tape is able to conform to a curved or irregular surface. It offers zero permeability, installs without special tools and is highly puncture and tear resistant - ideal for any indoor or outdoor task. This laminate tape can withstand temperatures as cold as -40 °F/-40 °C and as hot as 248 °F/120 °C. It’s suitable for use on materials like fiberglass, polystyrene and conformable aerogel. It protects insulation against mold, UV, weather, oil and grease, chemicals, impact and mechanical abuse, corrosion under insulation (CUI). This tape qualifies for compliance credit for LEED® v4 and is UL723 classified. 3M™ VentureClad™ Insulation Jacketing System 1577CW-WM provides a reliable barrier and protection during jacketing and cladding operations.
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.
