3M™ Thermally Conductive Interface Pad Sheet 5516, 320 mm x 230 mm 1.5 mm, 20/Case
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time105
-
Manufacturer3M
-
SAP7000138631
-
3M IDWX300909560
-
UPC22-22222-23058-1
-
Product Formal Name3M™ Thermally Conductive Interface Pad Sheet 5516, 320 mm x 230 mm 1.5 mm, 20/Case
-
Case UnitOrder of 3 Cases of 20
-
Unit of MeasureSheet
-
Product ID5516
-
Estimated Lead Time105
-
Size12-5/8 in x 754 ft
-
Inventory Status CodeN
-
Technical Informationhttps://multimedia.3m.com/mws/media/527580J/3mtm-thermally-conductive-interface-pads-5516-5516s.jpg
-
Country of OriginSouth Korea
-
Return PolicyNo Return
-
Width12-5/8 in
-
Length754 ft
-
Box Length (in)9.6
-
Box Width (in)13.7
-
Box Height (in)2.3
- Bullets
-
Bullet 1- Good thermal conductivity (3.1 w/m-K)
- Good softness and is conformable at low pressure ( Shore 00 = 50)
- Softness results in low stress on board components
- Good dielectric properties
- Slight tack allows pre-assembly
- Good wettability for better thermal conductivity
- UL 94 V-0
- High temperature résistance
- Tacky both sides
- Thickness: 1.5 mm
- Larger sheet size is available
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number3920991000
-
UNSPSC Code32000000
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item156600
-
NMFC Class060.0
-
NMFC Sub11
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint TransportNo Flash Point
-
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.