3M™ Scotch-Weld™ Toughened Epoxy Adhesive LSB60NS, Gray, Part B, 55 Gallon Drum (50 Gallon Net)
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time33
-
Manufacturer3M
-
SAP7100198390
-
UPC06-38060-40270-2
-
Product Formal Name3M™ Scotch-Weld™ Toughened Epoxy Adhesive LSB60NS, Gray, Part B, 55 Gallon Drum (50 Gallon Net)
-
BrandScotch-Weld
-
Case UnitCase of 400
-
Unit of Measure400 Gallon Drum (Pail)
-
Product IDLSB60NS
-
Estimated Lead Time33
-
Volume55 Gallon Drum
-
ColorGray
-
Inventory Status CodeN
-
Country of OriginUSA
-
Return PolicyNo Return
-
Box Length (in)23.8
-
Box Width (in)23.8
-
Box Height (in)34.8
- Bullets
-
Bullet 1- Toughened for heightened resistance against shock, vibration, and impact loads
- 90 minute work life provides ample time for positioning and adjustment
- Features good long-term holding power, and high peel strength
- Delivers non-sag formulation so adhesive stays where applied
- Ideal for bulk application through meter mix dispensing equipment
-
- Transportation
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT RESTRICTED, AS PER 49 CFR 171.4, MARINE POLLUTANT EXCEPTION
-
United States Department Of Transportation Vessel US DOT, 49 CFRUN3082, ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S., (EPOXY RESIN), 9, III, MARINE POLLUTANT, (EPOXY RESIN)
-
NMFC Item004620
-
NMFC Class060.0
-
NMFC Sub02
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationUN3082, ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S., (EPOXY RESIN), 9, III
-
International Maritime OrganizationFORBIDDEN 3M U.S. AIR POLICY - PACKAGE SIZE EXCEEDS THE 3M ALLOWABLE AMOUNT
-
Flashpoint TransportNo Flash Point
-
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.