3M™ Scotch-Weld™ Epoxy Adhesive DP190, Gray, 48.5 mL Duo-Pak, 12/case
3M™ Scotch-Weld™ Epoxy Adhesive DP190 - Translucent is a two-part epoxy adhesive that delivers exceptional performance with high shear and peel strength. We formulated this epoxy adhesive to bond to a wide range of materials, such as metals, ceramics, wood, fiberboard, glass, rubber and many plastics.
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7010410438
-
3M ID62355314360
-
UPC06-38060-08992-7
-
Product Formal Name3M™ Scotch-Weld™ Epoxy Adhesive DP190, Gray, 48.5 mL Duo-Pak, 12/case
-
BrandScotch-Weld
-
Case UnitCase of 12
-
Unit of MeasureEach
-
Product IDDP190
-
Estimated Lead Time2
-
Volume48.5 mL
-
ColorGray
-
Inventory Status CodeS
-
Technical Informationhttps://multimedia.3m.com/mws/media/79082J/joint-design-for-structural-adhesives-technical-bulletin.jpg
-
Instructions/Manualhttps://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00x4x_x48mGOv70k17zHvu9lxtD7SSSSSS--
-
Country of OriginUSA
-
Return PolicyNo Return
-
Box Length (in)6.1
-
Box Width (in)4.6
-
Box Height (in)5.3
- Bullets
-
Bullet 1- Provides tough, strong bonds through High shear and peel strength
- Two formulations with moderate (gray) or High (Translucent) flexibility and elongation
- capable of bonding to a wide variety of different materials
- delivers extended Work-life, providing additional time for adjustment
- medium (gray) or low (Translucent) viscosity and self-leveling
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number3506105000
-
UNSPSC Code31200000
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT RESTRICTED, AS PER 49 CFR 171.4, MARINE POLLUTANT EXCEPTION
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT RESTRICTED, AS PER 49 CFR 171.4, MARINE POLLUTANT EXCEPTION
-
NMFC Item004620
-
NMFC Class085.0
-
NMFC Sub01
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT RESTRICTED, AS PER SPECIAL PROVISION A197, ENVIRONMENTALLY HAZARDOUS SUBSTANCE EXCEPTION
-
International Maritime OrganizationNOT RESTRICTED, AS PER IMDG CODE 2.10.2.7, MARINE POLLUTANT EXCEPTION
-
Flashpoint TransportNo Flash Point
-
-
SKU7010410438
-
UPC/ISBN00638060089927
When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.Provides Tough, Strong Bonds Through High Shear and Peel Strength3M™ Scotch-Weld™ Epoxy Adhesive DP190 features an extended work life for adjustment and precise application, and reaches handling strength in 10 hours. It is engineered for a 1:1 mix ratio and exhibits good environmental aging properties, delivering long-term durability.Gray Formulation3M™ Scotch-Weld™ Epoxy Adhesive DP190-Gray has a moderately high modulus and medium viscosity. It has a 90-minute work-life and reaches full cure in 7 days at room temperature. 3M™ Scotch-Weld™ Epoxy Adhesive DP190-Gray is flammability tested per UL94 HB. It has the same base and accelerator as 3M™ Scotch-Weld™ Epoxy Adhesive 2216 Gray, but is packaged in a 1:1 Duo-Pak (2216 Gray is a 2:3 ratio product by volume).Translucent Formulation3M™ Scotch-Weld™ Epoxy Adhesive DP190-Translucent has a moderately low modulus and low viscosity. It has an 80-minute work-life and reaches full cure in 14 days at room temperature.Recommended ApplicationsPlastic to metal bondingWood to metal bondingWood to plastic bondingSemi-flexible potting compoundUnderstanding Epoxy AdhesivesEpoxy adhesives are part of the class of adhesives called "structural adhesives," which include polyurethane, acrylic, cyanoacrylate and others. Epoxies are formulated as liquid reactive polymers that undergo a chemical reaction when mixed and then cure to form a solid plastic material. Once the two parts are mixed in their specified ratio, they begin the curing process and offer a limited working time where the adhesive can be applied and the two surfaces positioned as needed. This work life lasts anywhere from a few minutes to several hours. These structural adhesives provide high shear and peel strengths, depending on the formula, and better heat and chemical resistance than other common adhesives. In general, epoxy adhesives have the highest overall strength and offer the best performance and most resistance to high temperatures, solvents and outdoor weathering.Epoxy adhesive (often referred to as epoxy glue) is widely used in building and home construction; aircraft and automobile manufacturing; bicycle, boat, golf clubs, ski and snowboard assembly as well as a host of home use and other applications. It is used virtually anywhere high-strength bonds are needed along with resistance to environmental conditions. These adhesives are popular for their ease of use, mechanical strength and chemical resistance. Formulations can be created to make epoxy for plastic flexible or epoxy for metal rigid, epoxy resin transparent or opaque, quick setting or slow setting. The versatility with which these adhesives can be formulated helps meet almost any requirement for bonding wood, metal, glass, stone and various plastics.
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.
