3M™ Scotch-Weld™ Epoxy Adhesive 100NS, Translucent, Part A , 5 Gallon Drum (Pail)

3M™ Scotch-Weld™ Epoxy Adhesive DP100NS is a non-sag, two-part, rigid epoxy adhesive offering a fast cure and machinability. It is a fast-setting epoxy that cures at room temperature to form a rigid bond. Non-sag formulation ensures adhesive stays where applied.
Price: $3636.40

(Case of 5 5 Gallon Drum (Pail))

Estimated Lead Time is 43 working days.
  • $3636.40
  • Case of 5 - $3636.40
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      52.7 lbs
    • SKU
      7010367412
    • UPC/ISBN
      00021200822575
  • Industry
    IB
  • Lead Time
    43
  • Manufacturer
    3M
  • SAP
    7010367412
  • 3M ID
    62336585302
  • UPC
    00-21200-82257-5
  • Product Formal Name
    3M™ Scotch-Weld™ Epoxy Adhesive 100NS, Translucent, Part A , 5 Gallon Drum (Pail)
  • Brand
    Scotch-Weld
  • Case Unit
    Case of 5
  • Unit of Measure
    5 Gallon Drum (Pail)
  • Product ID
    100NS
  • Estimated Lead Time
    43
  • Volume
    5 Gallon Drum (Pail)
  • Color
    Translucent
  • Inventory Status Code
    N
  • Technical Information
    https://multimedia.3m.com/mws/media/79082J/joint-design-for-structural-adhesives-technical-bulletin.jpg
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00x4x_vOY_Znv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Return Policy
    No Return
  • Box Length (in)
    11.8
  • Box Width (in)
    11.8
  • Box Height (in)
    13.5
  • Bullets
    • Bullet 1
      - Adhesive formula cures rigid for high static load holding
      - High shear ensures permanent bonds
      - Fast 5 minute work life with handling strength in about 15 minutes at room temperature
      - Non-sag formulation ensures adhesive stays where applied
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      3506911000;3506915000
    • UNSPSC Code
      31201607
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      004620
    • NMFC Class
      060.0
    • NMFC Sub
      02
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7010367412
  • UPC/ISBN
    00021200822575

When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing. Available in Duo-Pak and bulk containersNon-Sag Formulation Ensures Adhesive Stays in Place 3M™ Scotch-Weld™ Epoxy Adhesive DP100NS is a non-sag, versatile structural adhesive for general purpose bonding. It works on a variety of substrates including metals, ceramics, concrete and wood. With a high shear strength it delivers strong, rigid performance, making it ideal for multiple applications in the electrical, general industrial, construction and consumer goods industries. Recommended Applications General attachment applications in a variety of industries Attachment of various substrates that require permanency Applications that require machining afterwards Fast 5 Minute Work Life with Handling Strength in 15 Minutes The mix ratio for 3M™ Scotch-Weld™ Epoxy Adhesive DP100NS is 1:1 for quick, precise dispensing, and with a 5-minute working time there's some opportunity for repositioning for precise alignment of parts. The adhesive reaches handling strength in approximately 15 minutes and is fully cured in 48 hours (at 72F/22C). Understanding EpoxyAdhesives Epoxy adhesives, including 5 minute epoxy, are part of the class of adhesives called "structural adhesives," which include polyurethane, acrylic, cyanoacrylate and others. Epoxies are formulated as liquid reactive polymers that undergo a chemical reaction when mixed and then cure to form a solid plastic material. Once the two parts are mixed in their specified ratio, they begin the curing process and offer a limited working time where the adhesive can be applied and the two surfaces positioned as needed. This work life lasts anywhere from a few minutes to several hours. These structural adhesives provide high shear and peel strengths, depending on the formula, and better heat and chemical resistance than other common adhesives. In general, epoxy adhesives have the highest overall strength and offer the best performance and most resistance to high temperatures, solvents and outdoor weathering. Epoxy adhesive (often referred to as epoxy glue) is widely used in building and home construction; aircraft and automobile manufacturing; bicycle, boat, golf clubs, ski and snowboard assembly as well as a host of home use and other applications. It is used virtually anywhere high-strength bonds are needed along with resistance to environmental conditions. These adhesives are popular for their ease of use, mechanical strength and chemical resistance. Formulations can be created to make epoxy for plastic flexible or epoxy for metal rigid, epoxy resin transparent or opaque, quick setting or slow

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.

Dispensing 3M Scotch-Weld Structural Adhesives in Battery Assemblies
3M Industrial Adhesives Beyond Strong Drop It Test