3M™ Paste Rubbing Compound, 05983, 1 gal, 4 per case
Our 3M™ Paste Rubbing Compound is specially designed to remove fine 1200, 1500 and 2000 grit sanding scratches in a wide range of automotive paint including clear coat. This compound for collision repair adds a fast cutting option to our complete paint finishing system, created for deeper colors and glossier finishes. Use with either a wool or foam compounding pad.
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7000000340
-
3M ID60410009702
-
UPC00-51131-05983-2
-
Product Formal Name3M™ Paste Rubbing Compound, 05983, 1 gal, 4 per case
-
Brand-oldPerfect-It
-
Case UnitCase of 4
-
Unit of MeasureCanister
-
Estimated Lead Time2
-
Color-oldTan
-
Inventory Status CodeS
-
Instructions/Manualhttps://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00x4Y_vM8_1Nv70k17zHvu9lxtD7SSSSSS--
-
Country of OriginUSA
-
Product FormRubbing Compound
-
ApplicationsPaint Finishing & Detailing
-
Sub ApplicationsScratch Refinement
-
ConsistencyPaste
-
Return PolicyNo Return
-
Box Length (in)14.5
-
Box Width (in)14.4
-
Box Height (in)8.2
- Bullets
-
Bullet 1- Paste compound specially designed for removing fine grit sanding scratches
- Medium cutting capability is suitable for paint and clear coat
- Produces minimal swirl marks, reducing finishing work
- Buffs to high gloss for consistently professional results
- Adds range to Perfect-It™ Paint Finishing system compounding stage
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number3405300000
-
UNSPSC Code12350000
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item033440
-
NMFC Class055.0
-
NMFC Sub00
-
Transport Protective ServiceMAINTAIN TEMP ABOVE 32F (0C)
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint Transport150°F/65°C
-
-
SKU7000000340
-
UPC/ISBN00051131059832
The Finer Points of CompoundingPart of our Paint Finishing System, our 3M™ Paste Rubbing Compound is designed for removing fine scratches left during the color sanding process with minimal compound swirl marks. This fast cutting paste applies easily with a polisher and a 3M™ compounding pad. This paste rubbing compound removes 1200, 1500 and 2000 grit sand scratches on automotive clear coats for a professional high gloss finish. For the fastest cut, use a wool pad like 3M™ Wool Compounding Pad PN05711. For a finer finish, use a foam pad like 3M™ Foam Compounding Pad PN05723.Our Paint Finishing SystemWe developed our 3M™ system to produce showroom grade finishes with deep color and rich gloss. Our system uses a progressive series of abrasives, buffing pads, and proprietary polishes across the repair. The stages consist of sanding, scratch refinement, compounding, machine polishing, and swirl elimination. The level of work and stages needed for paint repair depend on the severity of the paint imperfection and 3M™ provides an effective solution for any level of clear coat and paint repair.Better Science Toward the Perfect Finish, Only from 3MPaste Rubbing Compound expands the range of what's possible when paint finishing in collision repair. Its non-gritty, fast cutting capability and its paste consistency make it ideal during the critical compounding stages of auto paint repair and restoration. 3M™ Paste Rubbing Compound reduces time and saves you money. It's another way that 3M helps you strive toward the perfect finish in your collision repair operation.
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.