3M™ Panel Bonding Adhesive, 08115, 200 mL Cartridge, 6 per case
Our 3M™ Panel Bonding Adhesive is a cost-effective two-part epoxy adhesive for bonding replacement body panels. From its fast, convenient cartridge system the adhesive seals and bonds steel, aluminum, SMC, and FRP securely in a single operation.
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7000000610
-
3M ID60980030930
-
UPC00-51135-08115-0
-
Product Formal Name3M™ Panel Bonding Adhesive, 08115, 200 mL Cartridge, 6 per case
-
Brand-old3M
-
Catalog Product CategoryAdhesives
-
Case UnitCase of 6
-
Unit of MeasureEach
-
Estimated Lead Time2
-
Volume200 mL
-
ColorBlack
-
Color-oldBlack
-
Inventory Status CodeS
-
Technical Informationhttps://multimedia.3m.com/mws/media/761729O/3m-panel-bonding-adhesive-08115-38315-58115-technical-data-sheet.pdf&fn=TDS 08115 38315 58115 3M Panel Bonding Adhesive Rev 5_R3.pdf
-
Country of OriginUSA
-
ApplicationsDoor Hem Flanges
-
Adhesive TypeTwo-Part Epoxy
-
ConsistencyPaste
-
Return PolicyNo Return
-
Box Length (in)12
-
Box Width (in)9.6
-
Box Height (in)5.4
- Bullets
-
Bullet 1- Recommended by many OEMs
- Provides corrosion protection with lifetime warranty
- Room temperature curing (accelerated curing with heat)
- can be weld bonded or rivet bonded within working time
- Adheres to a wide variety of properly prepared steel and aluminum substrates
- May be used on many plastic and composite substrates
- glass bead technology protects against overclamping and maintains a minimum bond line thickness
- has excellent shelf life opened or unopened, reducing unused Product replacement costs
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number3506105000
-
UNSPSC Code12190000
-
United States Department Of Transportation Ground US DOT, 49 CFRLIMITED QUANTITY
-
United States Department Of Transportation Vessel US DOT, 49 CFRUN3267, CORROSIVE LIQUID, BASIC, ORGANIC, N.O.S., (BIS(3-AMINOPROPYL) ETHER OF DIETHYLENE GLYCOL, BIS((DIMETHYLAMINO)METHYL)PHENOL), 8, II, LIMITED QUANTITY
-
NMFC Item156240
-
NMFC Class060.0
-
NMFC Sub00
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationUN3267, CORROSIVE LIQUID, BASIC, ORGANIC, N.O.S., (BIS(3-AMINOPROPYL) ETHER OF DIETHYLENE GLYCOL, BIS((DIMETHYLAMINO)METHYL)PHENOL), 8, II
-
International Maritime OrganizationUN3267, CORROSIVE LIQUID, BASIC, ORGANIC, N.O.S., (BIS(3-AMINOPROPYL) ETHER OF DIETHYLENE GLYCOL, BIS((DIMETHYLAMINO)METHYL)PHENOL), 8, II, LIMITED QUANTITY
-
Flashpoint Transport>220°F/104°C
-
-
SKU7000000610
-
UPC/ISBN00051135081150
The result of years of development and testing, our 3M™ Panel Bonding Adhesive bonds and seals plastic and metal substrates including cold roll steel, aluminum, SMC, and FRP (traditional fiberglass). It is ideal for bonding quarter panels, roofs skins, box sides, van sides, utility vehicle sides and door skins - anywhere that requires a lasting bond for outer body panels, without the added time and expense of riveting or welding. In fact, adhesive bonding can be a time and money-saving replacement for many collision repair jobs that have traditionally required welding or riveting. Many interior or other adjacent parts that must be removed to avoid damage from welding can remain installed when bonding.Note: Panel Bonding Adhesive should only be used to bond structural components such as pillars, rockers or frame members when specified by an OEM (Example: Aluminum Ford F-150). Unless specified by an OEM, structural components should be welded.Efficient ApplicationTwo-part panel bonding adhesive is available from 3M in cartridges from 50 mL to 400 mL, and works seamlessly with 3M manual applicator guns such as 08117 and the 3M pneumatic applicator gun 09930 for the 200ml cartridges. It applies quickly from the cartridge with no pre-mixing or measuring. The adhesive contains glass beads which reduces excessive squeeze-out and makes it easy to form consistent bondlines. A work time of up to two hours and the added heat-assisted on-demand curing allows for accurate application, squeeze-out sealing and cleanup. The bonding adhesive also has an excellent shelf life even after it's been opened, reducing the cost of replacing unused product.The Benefits of Bonding vs. WeldingBonding adhesive maximizes shop time, as it can be used quickly and conveniently for many applications where welding or riveting have traditionally been the best options. Technicians can save time by welding only where adhesive peel failure or ghost lines are a concern, and achieve better results by bonding in areas where sheet metal can warp during the welding process. You can even resistance spot weld directly through uncured adhesive for areas where a weld can add stability. The bonding adhesive contains corrosion inhibitors to resists corrosion much better than welds or rivets, helping to extend the life of the body panel repair.Note: Panel Bonding Adhesive should only be used to bond structural components such as pillars, rockers or frame members when specified by an OEM (Example: Aluminum Ford F-150). Unless specified by an OEM, structural components should be welded.Better Science for Better Bonding from 3M3M™ Panel Bonding Adhesive is the result of years of laboratory development and field testing. Our scientists pioneered bondline control" in the collision repair market, incorporating glass beads into our adhesive formula that work as built-in spacers for optimal bond line thicknesses. Our adhesive cartridges, together with our manual and pneumatic applicator guns and mixing nozzles, form a system that eliminates pre-mixing or measuring of two-part epoxies. The ability to bond effectively results in a more versatile, cost-effective shop.
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.