3M™ Hot Melt Adhesive 3748-Q Off-White, 5/8 in x 8 in, 11 lb
3M™ Hot Melt Adhesive 3748 is a tough, flexible hot melt adhesive with exceptional low temperature thermal shock properties that is able to provide optimal adhesion in fluctuating temperatures. As a 100% solids thermoplastic resin, this hot melt adhesive offers excellent durability for a wide variety of applications.
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7000000878
-
3M ID62374891323
-
UPC00-21200-76374-8
-
Product Formal Name3M™ Hot Melt Adhesive 3748-Q Off-White, 5/8 in x 8 in, 11 lb
-
Brand-old3M
-
Case UnitCase of 11
-
Unit of MeasureUS pound
-
Product ID3748
-
Estimated Lead Time2
-
Size5/8 in x 8 in
-
Size Metric8 Inch x 0.2 m
-
ColorOff-White
-
Inventory Status CodeS
-
Technical Informationhttps://multimedia.3m.com/mws/media/1245163O/3m-hot-melt-adhesive-3764-3748-technical-data-sheet.pdf&fn=3M Hot Melt Adhesive 3764, 3748 062016.pdf
-
Instructions/Manualhttps://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00x4xtGPY_SMv70k17zHvu9lxtD7SSSSSS--
-
Country of OriginUSA
-
Product FormPound
-
IndustriesAutomotive
-
ApplicationsSealing, Potting and Encapsulating
-
Application MethodHandheld Process
-
Adhesive TypePolypropylene
-
Return PolicyNo Return
-
Width5/8 in
-
Length8 in
-
Box Length (in)8.4
-
Box Width (in)6.6
-
Box Height (in)10.6
- Bullets
-
Bullet 1- High temperature performance and thermal shock resistance
- Formulated for bonding low surface energy plastics and coatings to dissimilar materials
- High peel delivers long-term strength and durability
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number3506915000
-
UNSPSC Code31200000
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item004620
-
NMFC Class060.0
-
NMFC Sub02
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint TransportNo Flash Point
-
-
SKU7000000878
-
UPC/ISBN00021200763748
Provides High Temperature Stability 175F / 79C for a Durable Bond3M™ Hot Melt Adhesive 3748 provides good resistance to heat, impact, fuel and oil. It is manufactured using 100% solids, thermoplastic resin for use with a 3M™ Hot Melt Applicator. This adhesive provides high temperature stability 175F / 79C with a 25-second open time that is sufficient for fit positioning and adjusting. 3M™ Hot Melt Adhesive 3748 will bond wood, polypropylene, electronics, vinyl and lightweight substrates on furniture, automotive interiors, outdoor applications, small appliances and general product assembly.Recommended ApplicationsTransportation interiorsSeating attachmentGeneral product assemblyUnderstanding Hot Melt AdhesivesHot melt adhesives, also known as glue sticks, are liquefied thermoplastic adhesives available in both low and high-temperature versions. Low temperature hot melt adhesives are applied at 250F/121C temperatures, which makes them ideal for bonding electronics, plastics, cloth and other heat sensitive materials. High temperature hot melt adhesives are applied at 380F/193C and produce a stronger bond than the low temperature hot melts.Melted adhesive is extruded through a nozzle using a 3M Hot Melt Applicator by either pneumatic pressure, a mechanical trigger mechanism, or with pressure applied directly on the stick. Different nozzles can be used to apply thin, wide strips or narrow, thicker beads. Hot melt adhesive generally sets quickly, ranging from a few seconds to a few minutes, depending on the adhesive formulation.Bringing Better Ideas to the Surface through Science and InnovationIn our 3M Industrial Adhesives and Tapes Division, we apply the science of adhesion to deliver innovative solutions that improve the design and manufacturing processes of companies around the world. In the end, our technologies help customers like you deliver competitive products to the market faster and more efficiently.
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.