3M™ Hookit™ Purple Clean Sanding Disc 343U, 30272, P500, 50 discs per carton, 4 cartons per case
Our 3M™ Hookit™ Purple Clean Sanding Abrasive Disc 334U combines excellent dust removal and fast cutting, long lasting abrasive for higher productivity and lower cycle times. A spiral pattern clears dust from the surface and reduces loading for longer disc life – up to 3 times longer than traditional auto body abrasive discs. Our 3M™ Hookit™ attachment system makes disc change-outs fast and easy.
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7000000488
-
3M IDXA012056157
-
UPC00-51131-30272-3
-
Product Formal Name3M™ Hookit™ Purple Clean Sanding Disc 343U, 30272, P500, 50 discs per carton, 4 cartons per case
-
Brand-oldHookit
-
BrandHookit
-
Case UnitCase of 200
-
Unit of MeasurePack/Carton
-
Product ID343U
-
Estimated Lead Time2
-
GradeFine
-
Grit/Micron500
-
Grade RangeFine (P500-P3000 +5000)
-
Size3 in
-
Diameter3 in
-
Diameter (Metric)76 mm
-
ColorPurple
-
Inventory Status CodeS
-
Data Sheethttp://multimedia.3m.com/mws/media/625276O
-
Technical Informationhttps://multimedia.3m.com/mws/media/625276O/3m-purple-clean-sanding-hookit-abrasive-disc.pdf&fn=Prpl Cln Snd Hkit AbrDisc.pdf
-
Country of OriginUSA
-
Product FormAbrasive Disc
-
ApplicationsPaint Preparation
-
Attachment TypeHookit
-
Mineral TypeAluminum Oxide
-
Backing WeightC Weight
-
Form TypeClean Sanding
-
Return PolicyNo Return
-
Width3 in
-
Box Length (in)7
-
Box Width (in)4.6
-
Box Height (in)4.1
- Bullets
-
Bullet 1- Aluminum oxide abrasive provides a fast cut, long life and professional results
- Discs can last 2-3 times longer than traditional discs
- Stearate coating helps resist loading for extended performance
- Spiral-patterned design features many small holes for dust extraction and reduced loading
- Multi-hole disc pattern eliminates hole alignment for quicker changes, longer disc life
- 3M™ Hookit™ attachment system makes for fast, efficient disc change-outs
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number6805200000
-
UNSPSC Code25000000
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item001100
-
NMFC Class055.0
-
NMFC Sub00
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint TransportNo Flash Point
-
-
SKU7000000488
-
UPC/ISBN00051131302723
Built for Longer Disc LifeSo much technology in one abrasive disc: our 3M™ Hookit™ Purple Clean Sanding Abrasive Disc 334U cuts fast, lasts long, resists loading and leaves a consistent finish across a wide range of applications. It features durable, fast-cutting aluminum oxide abrasive built on C-weight paper backing. A spiral pattern, made up of many tiny holes, keeps particulates away from the surface to reduce loading. When used with dust extraction systems dust will be captured rather than staying on the sanding surface or floating in the air. This pattern also eliminates the need for hole alignment, making it faster and easier to change the discs and extending the abrasive's useful life. Discs are available in grades P240 - P800, ideal for featheredging, fine featheredging or as a last step before priming. They are also great for prepping before blending. Our Hookit™ attachment system makes for fast and efficient disc change-outs without tools.Hard, Tough and Sharp3M ,s fast cutting, long lasting abrasive saves labor costs and improves quality. Aluminum oxide is popular among collision repair professionals because of its fast cut-rate and long life. A natural mineral, it makes a tough, durable abrasive that stays sharp longer. Aluminum oxide is suitable for a wide variety of metalworking materials including ferrous alloys. These discs sand fast to improve technician productivity and reduce labor costs, and the consistent finish reduces rework further improving repair efficiency.Spiral Hole Pattern Helps You Get More from Each DiscTo achieve maximum performance, the discs are designed with small spiral-patterned holes to give dust a better escape route, moving more dust away from your finishing surface without loading the disc.The spiral hole configuration allows for optimal particulate removal improving performance when used with or without a dust extraction system.When using dust extraction, hole alignment is not necessary to achieve direct air flow from the workpiece through the abrasive disc. Technicians can change these discs more quickly, saving time and promoting re-use, helping preserve abrasive life.In fact, 3M™ Hookit™ Purple Clean Sanding Abrasive Disc 334U can last 2 - 3 times longer than other discs - delivering professional results while improving the bottom line in collision repair.Our Hookit™ Attachment System3M offers a complete line of hook-and-loop style Hookit™ discs for work spaces where adhesive backing may become contaminated by dust, dirt, or flyingdebris. Hookit™ discs conveniently and firmly attach to a hook-and-loop backup disc pad (sold separately). It's simple: just attach the disc to the backup pad and start sanding. It removes just as easily and cleanly, and can be re-used again and again for the extent of the abrasive life. To ensure easy, fast attachment, the precise spiral multi-hole pattern of the 3M™ Hookit™ Purple Clean Sanding Abrasive Disc 334U does not require hole alignment with the back-up pad.Better Science for Better Sanding from 3MThe 3M™ Hookit™ Purple Clean Sanding Abrasive Disc 334U carries our Purple designation which indicates the latest 3M technology, greatest performance and highest quality available in an abrasive disc. From its fast-cutting abrasive to its unique spiral-patterned hole design, this disc combines performance, durability and long-lasting efficiency for improved throughput across your entire collision repair operation. It&
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.