3M™ Glass Cloth Tape 361, White, 23 1/2 in x 60 yd, 6.4 mil, 1 roll per case
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time24
-
Manufacturer3M
-
SAP7000001207
-
3M ID70006197043
-
UPC00-21200-73503-5
-
Product Formal Name3M™ Glass Cloth Tape 361, White, 23 1/2 in x 60 yd, 6.4 mil, 1 roll per case
-
Case UnitOrder of 2 Cases of 1
-
Unit of MeasureRoll
-
Product ID361
-
Estimated Lead Time24
-
Size23-1/2 in x 60 yd
-
ColorWhite
-
Inventory Status CodeN
-
Data Sheethttps://multimedia.3m.com/mws/media/1380008J/specialty-six-glass-cloth-tape-361-sell-sheet.jpg
-
Technical Informationhttps://multimedia.3m.com/mws/media/133910J/3mtm-glass-cloth-tape-361.jpg
-
Country of OriginUSA
-
Return PolicyNo Return
-
Width23-1/2 in
-
Length60 yd
-
Box Length (in)29.1
-
Box Width (in)6.3
-
Box Height (in)6.7
- Bullets
-
Bullet 1Strong abrasion resistant backing provides strength for bundling, harnessing and protection applications requiring high tensile strength;Silicone adhesive provides good holding power and clean removal across a wide range of temperatures;Withstands temperatures from -65°F/-54°C to 450°F/232°C and intermittent temperatures up to 550°F/288°C or higher, depending on the type and duration of the heat source;Can be certified to meet F.A.R. 25.853, flame resistant specification;Used for permanent sealing of high temperature ducts or chambers
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number7019611000;7019721500
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item049270
-
NMFC Class085.0
-
NMFC Sub00
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint TransportNo Flash Point
-
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.