:

Clear
Clear

3M™ Flap Wheel 747D, 80 X-weight, Type 83, 2 in x 1 in x 1/4 in, 10 ea/Case (Case of 10) SKU 7000000444

SKU: 7000000444

Mixed Ceramic Abrasive
Each flap on the 3M™ Flap Wheel 747D is covered with a ceramic abrasive mix, which was designed using a proprietary process to enhance toughness and hardness of the grain. For increased performance, this mix features aluminum oxide blended with 3M ceramic grain to create a harder, longer-lasting abrasive. Perfect for light to moderate stock removal, ceramic abrasives are engineered to cut fast and handle intense heat and stress applications. Ceramic/aluminum oxide blend surpasses aluminum oxide abrasives in cut-rate and durability and makes it an excellent choice for moderate stock removal and surface preparation.

High Quality Construction
The abrasive mix is attached to a flexible cotton backing using a resin bond. This resin bonding material is specially designed to resist thermal and chemical deterioration, which can occur during high speed sanding. This bond is very hard which allows for faster cuts and a higher cut rate. This wheel also includes a grinding aid for cooler running on stainless steel. Each flap uses an X-weight cotton backing, which provides a tough, but flexible surface that bends to fit any work piece. As the wheel is used, the self-cutting flaps wear away to expose sharp, new abrasive material, assuring that surfaces are sanded consistently throughout the life of the wheel.

Flap Wheel Advantages
Coated abrasive flap wheels are the ideal choice for light grinding, blending, graining and scale removal on a variety of metals. The abrasive flaps offer a long lasting supply of fresh abrasives and a load resistant design. 3M™ flap wheels are available in both flange mounted and spindle mounted constructions with general purpose aluminum oxide or high performing 3M ceramic aluminum oxide blend abrasive grain.

  • $136.46
 
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • SKU
      7000000444
    • Weight
      3 lbs
    • Barcode
      00051144807598
    • Dimensions (L x W x H)
      7.1 x 5.1 x 5 in
  • Industry
    IB
  • Marketplace Formal Name
    3M™ Flap Wheel 747D, 80 X-weight, Type 83, 2 in x 1 in x 1/4 in, 10 ea/Case (Case of 10) SKU 7000000444
  • Estimated Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7000000444
  • 3M ID
    60440262362
  • UPC
    00051144807598
  • Product Formal Name
    3M™ Stamark™ Surface Preparation Adhesive SPA60, Open Head, 5 gal Drum SKU 7000129547
  • Case Unit
    Case of 10
  • Unit of Measure
    Each
  • Product ID
    747D
  • Grit/Micron
    80
  • Size
    2 in x 1 in x 1/4 in
  • Diameter
    2 Inch
  • Color
    Orange
  • Inventory Status Code
    S
  • Country of Origin
    Mexico
  • Return Policy
    No Return
  • Width
    2 in
  • Length
    1 in
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      6805100000
    • UNSPSC Code
      31191500
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      001020
    • NMFC Class
      055.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
3M™ Flap Wheel 747D was designed for light grinding, blending, deburring, and polishing on a variety of metals. Ceramic abrasive covered flaps conform to the work piece and provide a smooth clean finish.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.

Customers who viewed this product also bought

Footer navigation