3M™ Factory-Match Seam Sealer, 08323, 200 mL Cartridge, 6 per case
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7000148202
-
3M ID60455030563
-
UPC00-51135-08323-9
-
Product Formal Name3M™ Factory-Match Seam Sealer, 08323, 200 mL Cartridge, 6 per case
-
Case UnitCase of 6
-
Unit of MeasureEach
-
Estimated Lead Time2
-
Inventory Status CodeS
-
Technical Informationhttps://multimedia.3m.com/mws/media/889066J/tds-08323-3m-factory-match-seam-sealer-rev-3.jpg
-
Instructions/Manualhttps://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xMx2vNx21ov70k17zHvu9lxtD7SSSSSS--
-
Country of OriginUSA
-
Return PolicyNo Return
-
Box Length (in)12
-
Box Width (in)9.6
-
Box Height (in)5.4
- Bullets
-
Bullet 1- Metered static mixing with dual syringe cartridge eliminates the difficulty and mess of manual mixing
- High performance two-part urethane seals vertical or horizontal seams to match OEM seals
- Flows slightly and softens on the edges without tooling for a rounded appearance
- Quick cure time and non-sag property aids during vertical applications
- Black
- To create a ribbon bead, use a 3M OEM Sealer Tip - 3/8 inch Flat PN 08204
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number3506915000
-
UNSPSC Code25000000
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT RESTRICTED, AS PER 49 CFR 171.4, MARINE POLLUTANT EXCEPTION
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT RESTRICTED, AS PER 49 CFR 171.4, MARINE POLLUTANT EXCEPTION
-
NMFC Item149610
-
NMFC Class055.0
-
NMFC Sub00
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT RESTRICTED, AS PER SPECIAL PROVISION A197, ENVIRONMENTALLY HAZARDOUS SUBSTANCE EXCEPTION
-
International Maritime OrganizationNOT RESTRICTED, AS PER IMDG CODE 2.10.2.7, MARINE POLLUTANT EXCEPTION
-
Flashpoint Transport>290°F/143°C
-
-
SKU7000148202
-
UPC/ISBN00051135083239
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.