3M™ Dual Lock PSA Soft Disc Pad 20247, 1-1/4 in, 20 per case
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7100123076
-
3M ID60440179566
-
UPC00-51141-20247-1
-
Product Formal Name3M™ Dual Lock PSA Soft Disc Pad 20247, 1-1/4 in, 20 per case
-
Brand-old3M
-
BrandDual Lock
-
Case UnitCase of 20
-
Unit of MeasureEach
-
Inner UnitInner of 10
-
Product ID20247
-
Estimated Lead Time2
-
Size1/4 in
-
Diameter1.25 Inch
-
Diameter (Metric)31.75 mm
-
Color-oldBlack
-
Inventory Status CodeS
-
Country of OriginUSA
-
Product FormDisc Pad
-
IndustriesAOEM
-
Equipment - MachinesNib Sanders
-
Attachment TypePSA
-
Form TypeFabricated
-
Max RPM7500 none
-
Return PolicyNo Return
-
Width1/4 in
-
Box Length (in)6.3
-
Box Width (in)6.3
-
Box Height (in)4.6
- Bullets
-
Bullet 1- Soft density disc pad provides cushion and conformability for finishing fine surfaces
- Dual Lock attachment is stronger in strength than typical hook-and-loop fasteners
- Mushroom-shaped stems snap in place to lock the pad in place
- Small diameter for repairing small defects in paint
- Drives Trizact film discs to level most defects
- Maximum rpm of 7500
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number8467990190
-
UNSPSC Code31191500
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item186640
-
NMFC Class150.0
-
NMFC Sub01
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint TransportNo Flash Point
-
-
SKU7100123076
-
UPC/ISBN00051141202471
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.