3M™ Dry Guide Coat Cartridge, 05860, 1.75 oz (50 g), 10 packs per case
3M™ Dry Guide Coat is used to identify surface imperfections such as pinholes in body filler and deep scratches in primer. Unlike liquid and aerosol guide coats, Dry Guide Coat requires no masking before use, and there is no dry time after application. The dry formula contains no intentionally added solvents and doesn't clog sandpaper while delivering easier cleanup.
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7000000596
-
3M ID60980026391
-
UPC00-51131-05860-6
-
Product Formal Name3M™ Dry Guide Coat Cartridge, 05860, 1.75 oz (50 g), 10 packs per case
-
Brand-old3M
-
Catalog Product CategoryBody Filler, Glaze and Related
-
Case UnitCase of 10
-
Unit of MeasureEach
-
Product ID05860
-
Estimated Lead Time2
-
ColorDark Gray
-
Inventory Status CodeS
-
Data Sheethttp://multimedia.3m.com/mws/media/1400183O
-
Country of OriginUnited Kingdom
-
Return PolicyNo Return
-
Box Length (in)9.5
-
Box Width (in)5.4
-
Box Height (in)11.1
- Bullets
-
Bullet 1- dry guide coat reveals surface imperfections such as pinholes and scratches
- dry consistency requires No masking and requires No drying time
- Product May be used in both wet or dry sanding
- Contains No intentionally added solvents
- Powder is Ideal to highlight body lines
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number3824999397
-
UNSPSC Code31211708
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item043940
-
NMFC Class085.0
-
NMFC Sub02
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint TransportNo Flash Point
-
-
SKU7000000596
-
UPC/ISBN00051131058606
Reveal Imperfections that Escape the Unaided Eye3M™ Dry Guide Coatis used in the dry primer sanding process to identify surface imperfections such as pinholes and deep scratches in primer. When sanding polyester filler, it ensures the filler is flat with no ripples and that the body styling lines and contours are straight and correct. It also ensures the total primed area is sanded prior to top coating.Check Now Before Discovering Problems LaterUsing this product prior to priming and sanding will save you rework later when surface imperfections would otherwise appear. You get superior visualization so you can correct problems early before they become bigger problems later. Once blemishes become evident after priming or painting, you have a choice to compromise the quality of the job or do costly rework.3M™ Dry Guide Coat saves you from that tough decision.Versatility of Dry Guide CoatOur dry guide coat is a carbon black powder that can be used on automotive and marine fillers, primers, paints and gelcoats. It may be used for either wet or dry sanding. The powder contains no intentionally added solventsthat can cause painting problems.
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.