• 0
:

Clear
Clear
Clear all
3M™ Cold Shrink Insulator 8427-16, Tape/Wire/UniShield® Shielding, 1 kV, Standard, 10/Case (Case ...

        3M™ Cold Shrink Insulator 8427-16, Tape/Wire/UniShield® Shielding, 1 kV, Standard, 10/Case (Case of 10) SKU 7100010774

        SKU: 7100010774
        3M has over 40 years of lab-tested and industry-proven results demonstrating the reliability of cold shrink technology. 3M™ Cold Shrink Connector Insulators 8420 and 8430 Series and the other products in the cold shrink family are engineered with specially formulated materials that deliver a durable environmental seal and insulation. The core and tube sizing allows for a broader application range while preserving the seal and insulation properties of the EPDM rubber tube. Six diameter sizes accommodate cables up to 1000 volts, ranging from 10 AWG to 1000 kcmil, for both copper and aluminum conductors. For applications with high UV exposure or where visual inspection isn't feasible, it is recommended to overwrap the tubing with Scotch® Super 33+™ Vinyl Electrical Tape or Scotch® Self-Fusing Silicone Rubber Electrical Tape 70.
        UniShield
        • $669.81
         
        • Return Policy

          Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

          Learn more
          • SKU
            7100010774
          • Weight
            4.3 lbs
          • Barcode
            00054007344605
          • Dimensions (L x W x H)
            21.3 x 9.6 x 9.3 in
        • Industry
          IB
        • Marketplace Formal Name
          3M™ Cold Shrink Insulator 8427-16, Tape/Wire/UniShield® Shielding, 1 kV, Standard, 10/Case (Case of 10) SKU 7100010774
        • Estimated Lead Time
          2
        • Manufacturer
          3M
        • SAP
          7100010774
        • 3M ID
          80610134043
        • UPC
          00054007344605
        • Product Formal Name
          3M™ Cold Shrink Insulator 8427-16, Tape/Wire/UniShield® Shielding, 1 kV, Standard, 10/Case (Case of 10) SKU 7100010774
        • Brand
          UniShield
        • Case Unit
          Case of 10
        • Unit of Measure
          Each
        • Product ID
          8427
        • Color
          Black
        • Inventory Status Code
          S
        • Country of Origin
          USA
        • Return Policy
          No Return
        • Transportation
          • ECCN Number
            EAR99
          • Harmonized Tariff Schedule Number
            8546900000
          • UNSPSC Code
            23150000
          • United States Department Of Transportation Ground US DOT, 49 CFR
            NOT REGULATED
          • United States Department Of Transportation Vessel US DOT, 49 CFR
            NOT REGULATED
          • NMFC Item
            051140
          • NMFC Class
            250.0
          • NMFC Sub
            03
          • Transport Protective Service
            PROTECTIVE SERVICE NOT REQUIRED
          • International Air Transport Association
            NOT REGULATED
          • International Maritime Organization
            NOT REGULATED
          • Flashpoint Transport
            No Flash Point
        3M™ Cold Shrink Connector Insulators 8420 and 8430 Series are EPDM, factory-expanded rubber tubes designed with cold shrink technology and loaded on a removable plastic core. To install the connection, position it over the inline connector, pull the loose tab on the plastic core while unwinding the core in a counterclockwise direction, allowing the ends of the tube to shrink and form a secure seal. Engineered for primary insulation of solid dielectric insulated wires and cable splices rated up to 1000 volts, the insulators can be used for indoor and outdoor applications to provide a water-resistant seal. They are easy to install by hand, requiring no additional tools or heating sources. Accommodating a variety of cable sizes, 3M™ Cold Shrink Connector Insulators 8420 and 8430 Series provide physical protection and environmental sealing for terminal lug barrels, conduit coupling, and conduit-to-cable breakouts. These insulators are ideal for direct burial or submersible applications involving communication and other non-electrical operations, such as dig-in and sheath repairs, and secondary splices for both copper and aluminum conductors. They can withstand an operating temperature range between -40 °F to 194 °F (-40 °C to 90 °C) and meet the water seal requirements of ANSI C119.1. When you need dependable insulating properties with long-lasting resiliency, look no further than 3M™ Cold Shrink Connector Insulators 8420 and 8430 Series.

        FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

        Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

        If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.