3M™ Sanding and Finishing Disc Holder, 03051ES, 2 inch, 12 per case
3M™ Sanding and Finishing Abrasive Disc Holder provides a support base for 2- or 3-inch 3M™ Roloc™ sanding or Scotch-Brite™ discs, helping maximize their abrasive performance. For convenience and ease of use, this disc holder is designed to lock easily and securely into a household drill or rotary tool.
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7010364781
-
3M ID60455097323
-
UPC00-51131-03051-0
-
Product Formal Name3M™ Sanding and Finishing Disc Holder, 03051ES, 2 inch, 12 per case
-
Case UnitCase of 12
-
Unit of MeasureEach
-
Inner UnitInner of 3
-
Product IDHolder
-
Estimated Lead Time2
-
Inventory Status CodeS
-
Country of OriginUSA
-
Return PolicyNo Return
-
Box Length (in)10.9
-
Box Width (in)6.1
-
Box Height (in)3.5
- Bullets
-
Bullet 1- Holder supports discs to quickly strip paint, primer and rust
- Designed for use with any 2- or 3-inch 3M™ Roloc™ sanding or Scotch-Brite™ discs
- Easily attaches to a household drill or rotary tool
- Roloc™ attachment allows quick and easy disc changes
- Contains (1) 2-inch Roloc™ disc holder
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number8467990190
-
UNSPSC Code25000000
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item156600
-
NMFC Class100.0
-
NMFC Sub06
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint TransportNo Flash Point
-
-
SKU7010364781
-
UPC/ISBN00051131030510
Strip Away Paint, Primer and RustWhen used with a sanding or finishing disc, our 3M™ Sanding and Finishing Abrasive Disc Holder works to quickly strip away paint, primer and rust. The disc holder is designed to give you more and better control for a range of tasks in Stage 1 of the 3M™ Body Repair System.Easy Disc Changes3M™Roloc™ attachment allows users to conveniently change discs with a simple twist-off, twist-on motion. Once the disc fully engages, it will stay securely in place until it is intentionally untwisted for removal. The wide variety of available Roloc sanding discs (sold separately) allows swapping from one application to the next in seconds.About the 3M™ Body Repair SystemEven a small repair can seem complex at first. So 3M's Body Repair System simplifies the entire automotive body repair process by dividing it into four stages:Stage 1 - Prepare. This stage includes pulling dents, removal of paint and rust and efficient, effective masking of the area.Stage 2 - Fill. This stage involves patching holes with reinforced filler and smoothing and shaping filler before painting.Stage 3 - Paint. This stage includes painting the area and blending and smoothing primer and paint.Stage 4 - Finish. The final stage for showroom-grade results: removing small defects, sealing and polishing clear coats and other painted surfaces.3M supplies premium products such as abrasives, tapes, body fillers and tools for every stage. This system helps you work easily, efficiently and successfully across the entire body repair process.
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.