3M™ Surface Protective Film 87630A, 1170 mm x 200 m, 0.063 mm, 1 roll per case
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7100035573
-
3M IDXG003888854
-
Product Formal Name3M™ Surface Protective Film 87630A, 1170 mm x 200 m, 0.063 mm, 1 roll per case
-
Case UnitCase of 1
-
Unit of MeasureRoll
-
Estimated Lead Time2
-
Size6-5/8 in x 656 ft
-
Inventory Status CodeS
-
Technical Informationhttps://multimedia.3m.com/mws/media/1180961O/3m-surface-protective-tape-87630a.pdf&fn=3M Surface Protective Tape 87630A TDS_R1.pdf
-
Country of OriginChina
-
Return PolicyNo Return
-
Width6-5/8 in
-
Length656 ft
-
Box Length (in)1.6
-
Box Width (in)1.6
-
Box Height (in)1
- Bullets
-
Bullet 1- Super clear polyester tape with a low-tack adhesive system
- Helps protect glass, plastics and metals of electronic devices with low adhesion build-up and clean removal
- Tape transparency enables inspection of the surface condition of the substrate without removing the tape
- Tape is easily applied with a laminator
- 2.5 mil (0.063 mm) total tape thickness (without liner)
- 90% transparency
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number3919905060
-
UNSPSC Code39120000
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item157320
-
NMFC Class000.0
-
NMFC Sub00
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint TransportNo Flash Point
-
-
SKU7100035573
-
UPC/ISBN06936177903247
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.