Economical, Reliable, High Temperature Powder Coat MaskingWith temperatures rising in powder coat paint operations, customers require a masking tape that can take the heat. Specifically designed for higher temp powder coat paint applications, 3M™ Polyimide Tape 8998 features a 2.0 mil thick polyimide backing with a 1.2 mil silicone adhesive. It is ideal for use in high temperature applications up to 500F/260C. Its dark amber color ensures easy identification and alignment. The high dimensional and exceptional tensile strength of this polyimide tape allows it to break through cured paint without silvering or tearing.Common uses for 3M™ Polyimide Tape 8998 include masking parts for powder coating, masking edges of overlap seams, e-coating, electroplating, anodizing and as a barrier of separation for dissimilar metals. It resists shrinking, curling and edge lifting and removes with zero adhesive residue. The thin, flexible backing seals tight on contact, peels off clean and leaves sharp, clear paint edges.Recommended ApplicationMasking parts for powder coatingMasking edges of overlap seamsBarrier of separation for dissimilar metalsPolyimide Tapes for High Temp Applications3M, the leader in masking tape technology, has developed a variety of polyimide tapes to insulate, mask, protect, seal, flash break, tab, powder coat and anodize mask. These revolutionary polyimide tapes withstand heat during rigorous, high-temperature masking operations. An exceptionally thin backing resists tears, abrasion, and the effects of aging. Pick a tape that can take the heat and keep your paint lines sharp!