3M™ Welding and Spark Deflection Paper, 05916, 24 in x 150 ft, 2 per case

3M™ Welding and Spark Deflection Paper helps protect vertical surfaces from damage caused by welding spatter and grinding sparks. Our flame-retardant paper comes with adhesive backing for easy application to vertical surfaces. The adhesive backing allows for easy repositioning of the spark deflection paper as needs change at a work site.
Price: $278.34

(Case of 2 Roll)

  • $278.34
  • Case of 2 - $278.34
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      12.1 lbs
    • SKU
      7000045694
    • UPC/ISBN
      00051131059160
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7000045694
  • 3M ID
    60980025252
  • UPC
    00-51131-05916-0
  • Product Formal Name
    3M™ Welding and Spark Deflection Paper, 05916, 24 in x 150 ft, 2 per case
  • Brand-old
    3M
  • Catalog Product Category
    Welding
  • Case Unit
    Case of 2
  • Unit of Measure
    Roll
  • Part Number
    5916
  • Estimated Lead Time
    2
  • Size
    24 in x 150 ft
  • Size Metric
    150 Linear Foot x 45 m
  • Color
    Brown
  • Color-old
    Brown
  • Inventory Status Code
    S
  • Data Sheet
    https://multimedia.3m.com/mws/media/1123415J/3m-welding-and-spark-deflection-paper-05916.jpg
  • Technical Information
    https://multimedia.3m.com/mws/media/881844O/05916-3mtm-welding-and-spark-deflection-paper-pdf.pdf&fn=05916 - 3M™ Welding and Spark Deflection Paper.pdf
  • Country of Origin
    USA
  • Applications
    Paint Preparation
  • Sub Applications
    Masking
  • Return Policy
    No Return
  • Width
    24 in
  • Length
    150 ft
  • Box Length (in)
    24.5
  • Box Width (in)
    8
  • Box Height (in)
    4.7
  • Bullets
    • Bullet 1
      - Deflection paper helps protect vertical surfaces from sparks and spatter
      - Recommended wherever welding or grinding tasks are performed
      - adhesive backing Allows for Simple installation
      - repositionable to allow for adjustments and repeat USES
      - easily cuts to fit repair size
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      4811411000
    • UNSPSC Code
      25000000
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      150930
    • NMFC Class
      085.0
    • NMFC Sub
      01
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7000045694
  • UPC/ISBN
    00051131059160

3M™ Welding and Spark Deflection Paper shields vertical surfaces from sparks and spatter that fly out when welding or grinding. Our flame-retardant paper comes with adhesive backing for easy application to vertical surfaces. The adhesive makes it simple to position and remove the paper as needed. The same paper can be used for numerous placements as needs change during a project.Our defection paper is recommended for protecting automotive glass, painted sheet metal, automotive light fixtures and many other vertical surfaces. We recommend using this paper to help prevent potential replacement of automotive parts due to spatter and spark. The paper may be cut to size to fit specific repairs.*Note: The product is not designed for installation on horizontal surfaces, such as roofs, deck lids, hoods, carpeting on floorboards. It is not designed to prevent heat transfer from sparks or spatter that are allowed to sit in one position on the paper, these will burn through.It is recommended to use 3M™ High Performance Welding Drape (PN 05919) for horizontal surfaces or any area where sparks will remain on the surface until cooled. Allowing sparks to remain on horizontal surfaces may result in burning or damage to the protected area.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.