3M™ Low-Static Non-Silicone Polyimide Film Tape 7419, 18 mm x 33 m
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time14
-
Manufacturer3M
-
SAP7010301465
-
3M ID70004030311
-
UPC00-51111-89730-0
-
Product Formal Name3M™ Low-Static Non-Silicone Polyimide Film Tape 7419, 18 mm x 33 m
-
Case UnitOrder of 2 Cases of 18
-
Unit of MeasureRoll
-
Product ID7419
-
Estimated Lead Time14
-
Size3/4 in x 36 yd
-
Inventory Status CodeN
-
Technical Informationhttps://multimedia.3m.com/mws/media/387510J/3m-low-static-polyimide-film-tape-7419.jpg
-
Country of OriginUSA
-
Return PolicyNo Return
-
Width3/4 in
-
Length36 yd
-
Box Length (in)8.3
-
Box Width (in)8.3
-
Box Height (in)14.3
- Bullets
-
Bullet 1- Specially formulated acrylic adhesive is resistant to typical solder mask temperatures for short periods of time
- Stays firmly in place during processing and removes cleanly from typical electronic substrates even after 10 min @ 500°s F (260°s C)
- Non-silicone adhesive formulation eliminates the potential for silicone contamination which can interfere with subsequent bonding or conformal coating operations
- The high temperature acrylic adhesive also has excellent chemical resistance and should be considered for demanding chemical masking applications
- Polyethylene tape core instead of cardboard
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number3919102055
-
UNSPSC Code31201500
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item056970
-
NMFC Class077.5
-
NMFC Sub00
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint TransportNo Flash Point
-
-
SKU7010301465
-
UPC/ISBN00051111897300
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.