3M™ Double Coated Tape 9740, 54 in x 250 yd, 1 roll per case
3M™ Double Coated Tape 9740 provides a combination of high initial adhesion and good shear holding power to a wide variety of materials, including many plastics and foams. This tape offers excellent continuous performance across a broad range of temperatures. The thin polyester carrier adds dimensional stability and improved handling during slitting and die-cutting operations.
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time14
-
Manufacturer3M
-
SAP7010310826
-
3M ID70000231814
-
UPC00-51125-65986-4
-
Product Formal Name3M™ Double Coated Tape 9740, 54 in x 250 yd, 1 roll per case
-
Case UnitCase of 1
-
Unit of MeasureRoll
-
Product ID9740
-
Estimated Lead Time14
-
Size54 in x 250 yd
-
Inventory Status CodeN
-
Data Sheethttps://multimedia.3m.com/mws/media/855985O/3m-splittable-flying-splice-tapes-splicing-solutions.pdf&fn=74309_Ordering Sheet_LR_R2.pdf
-
Technical Informationhttps://multimedia.3m.com/mws/media/506441O/double-coated-tape-9740.pdf&fn=70070940328.pdf
-
Country of OriginUSA
-
Return PolicyNo Return
-
Width54 in
-
Length250 yd
-
Box Length (in)11.7
-
Box Width (in)11.7
-
Box Height (in)54.5
- Bullets
-
Bullet 1- delivers excellent continuous performance across broad temperature range
- acrylic adhesive bonds well to most substrates including most low surface energy plastics
- Thin polyester Film carrier Adds dimensional stability and improved handling during die-cutting
- Provides superior bonding and conformability to irregular and flat surfaces
- Designed where Higher temperature, shear and plasticizer resistance is required
- performance grade splicing tape for corrugators and other High temperature splicing applications
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number3919905060
-
UNSPSC Code31201500
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item157190
-
NMFC Class060.0
-
NMFC Sub00
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint TransportNo Flash Point
-
-
SKU7010310826
-
UPC/ISBN00051125659864
Tape Bonds a Wide Variety of SurfacesThe robust 55 lb. densified kraft paper liner on 3M™ Double Coated Tape 9740 improves handling, protects against humidity and is ideal for die-cutting, automated dispensers and laminating applications. Considered a razor-thin alternative to glue, screws and rivets, double coated tape is often used for foam and gasket attachment in general industrial applications.Recommended ApplicationsAttachment to irregular surfacesBonding to plastics and metal extrusionsApplications where adhesion to low surface energy substrates is neededBonding of decorative trimHigh speed flying splices where heat resistance is requiredSuperior Bonding and Conformability on Irregular SurfacesAcrylic adhesive offers high adhesion to a wide variety of substrates, including most low surface energy plastics. The adhesive allows for superior bonding and conformability to irregular and flat surfaces. A thin polyester carrier between the adhesive layers improves the handling and strength of 3M™ Double Coated Tape 9740.Excellent Temperature Resistance3M™ Double Coated Tape 9740 offers an excellent continuous temperature resistance range from 10°F to 425°F (-12°C to 219°C). The ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended because the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory.A Solution for Many Bonding ApplicationsIn general, double coated tape is composed of a paper, film, or tissue carrier that is coated on both sides with pressure sensitive adhesive. The adhesive is protected by a peel-away liner that can be removed at the time of application or left in place until the joining surfaces are ready to be attached. These tapes can be applied by hand or with a dispenser. Double coated tape dispensers are available in a variety of configurations ranging from manual to fully automatic. Applications for double coated tape are found in splicing, construction, fabrication, arts and hobby.Bringing Better Ideas to the Surface through Science and InnovationIn our 3M Industrial Adhesives and Tapes Division, we apply the science of adhesion to deliver innovative solutions that improve the design and manufacturing processes of companies around the world. In the end, our technologies help customers like you deliver competitive products to the market faster and more efficiently.
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.