3M™ Double Coated Tape 9495LE, Clear, 3/4 in x 60 yd, 5.9 mil, 48 rolls per case
3M™ Double Coated Tape 9495LE provides high bond strength to most surfaces, including many low surface energy plastics such as polypropylene and powder coated paints. The acrylic adhesive also provides excellent adhesion to surfaces contaminated lightly with oil typically used with machine parts.
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time20
-
Manufacturer3M
-
SAP7010373125
-
3M ID70006294568
-
UPC00-21200-56496-3
-
Product Formal Name3M™ Double Coated Tape 9495LE, Clear, 3/4 in x 60 yd, 6.7 mil, 48 rolls per case
-
Brand-old3M
-
Case UnitCase of 48
-
Unit of MeasureRoll
-
Estimated Lead Time20
-
Size3/4 in x 60 yd
-
ColorClear
-
Color-oldClear
-
Inventory Status CodeN
-
Country of OriginUSA
-
Return PolicyNo Return
-
Width3/4 in
-
Length60 yd
-
Box Length (in)13.8
-
Box Width (in)13.8
-
Box Height (in)11.3
- Bullets
-
Bullet 1- Adds dimensional stability to foams and other substrates and also makes it easier to handle the tape during slitting and die-cutting
- 3M™ Double Coated Tape 9474LE features a dual liner for ease in selective die cutting
- The bond strength of 3M™ Laminating Adhesive 300LSE increases as a function of time and temperature, and has very high initial adhesion
- High bonding strength to LSE plastics
- Film carrier adding dimensional stability to foams and other substrates
- Film carrier makes for easy handling during slitting and die-cutting
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number3919102055
-
UNSPSC Code31201505
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item157190
-
NMFC Class060.0
-
NMFC Sub00
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint TransportNo Flash Point
-
-
SKU7010373125
-
UPC/ISBN00021200564963
3M™ Double Coated Tape 9495LE is a 6.7 mil thick, clear tape that provides high bond strength to most surfaces, including many low surface energy (LSE) plastics such as polypropylene and powder coated paints. Use on low surface energy surfaces and as plastic extrusion attachment. It also improves handling and ease of die-cutting.Recommended ApplicationsFoam to powder coated painted surfacesLow surface energy plastic adhesionLens bonding applicationsLogo bondingTouchpad bracket assemblyBattery bondingLow surface energy bondingMemory card bondingCase assemblyCamera module assemblyBezel bondingDisplay bondingCover lens bondingElectronic component bondingModule bonding to PET cardBattery door attachmentSpeaker module assemblyElectrical insulation bondingTouchpad assemblyTouch panel bondingRubber feet bondingCoats on BothIn general, double coated tape is composed of a paper, film or tissue carrier that is coated on both sides with pressure sensitive adhesive. The adhesive is protected by a peel-away liner that can beremoved at the time of application or left in place until the joining surfaces are ready to be attached. These tapes can be applied by hand or with a dispenser. Double coated tape dispensers are available in a variety of configurations ranging from manual to fully automatic. Applications for double coated tape are found in construction, fabrication, arts and hobbies.Bringing Better Ideas to the Surface through Science and InnovationIn our 3M Industrial Adhesives and Tapes Division, we apply the science of adhesion to deliver innovative solutions that improve the design and manufacturing processes of companies around the world. In the end, our technologies help customers like you deliver competitive products to the market faster and more efficiently.
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.