3M™ Adhesion Promoter K500, 1 Liter Can, 12 per case

3M™ Adhesion Promoter K500 is a liquid promoter used to improve the adhesion of 3M™ Acrylic Foam Tapes to most ethylene propylene diene monomer (EPDM), polypropylene (PP), chlorinated rubbers, acrylonitrile butadiene styrene (ABS) and certain polyethylene terephthalate (PET)/polybutylene terephthalate (PBT) blends used in automotive exterior trim applications.

Price: $571.02

(Case of 12 Canister)

Return Policy

Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.

Learn more

- Weight
  33.1 lbs
- SKU
  7000008223
- UPC/ISBN
  04901690398612
Industry
IB
Lead Time
2
Manufacturer
3M
SAP
7000008223
3M ID
JT240013394
UPC
49-01690-39861-2
Product Formal Name
3M™ Adhesion Promoter K500, 1 Liter Can, 12 per case
Case Unit
Case of 12
Unit of Measure
Canister
Product ID
K500
Estimated Lead Time
2
Volume
Liter
Inventory Status Code
S
Technical Information
https://multimedia.3m.com/mws/media/31507J/3mtm-adhesion-promotor-k500.jpg
Instructions/Manual
https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00x4x_vP8meMv70k17zHvu9lxtD7SSSSSS--
Country of Origin
Japan
Return Policy
No Return
Box Length (in)
15.6
Box Width (in)
11.3
Box Height (in)
9
Bullets
- Bullet 1
  - Improves bond strength of tape to ABS, EPDM, PP, TPO and other blends
  - Solvent system dries quickly
  - Ready to use with common application equipment
  - Formulated specifically for use with 3M™ Acrylic Foam Tapes
Transportation
- ECCN Number
  EAR99
- Harmonized Tariff Schedule Number
  3824992900;3824992990
- UNSPSC Code
  31201500
- United States Department Of Transportation Ground US DOT, 49 CFR
  LIMITED QUANTITY
- United States Department Of Transportation Vessel US DOT, 49 CFR
  UN1866, RESIN SOLUTION, 3, II, LIMITED QUANTITY, +004C
- NMFC Item
  046030
- NMFC Class
  055.0
- NMFC Sub
  00
- Transport Protective Service
  PROTECTIVE SERVICE NOT REQUIRED
- International Air Transport Association
  UN1866, RESIN SOLUTION, 3, II
- International Maritime Organization
  UN1866, RESIN SOLUTION, 3, II, LIMITED QUANTITY, +004C
- Flashpoint Transport
  40°F/4°C

SKU
7000008223
UPC/ISBN
04901690398612

Versatile Adhesion Promoter for 3M™ Acrylic Foam Tapes in Automotive Applications3M™ Adhesion Promoter K500 is a liquid promoter used for most EPDM, polypropylene, chlorinated rubbers, ABS, AES compounds and certain PET/PBT blends. Since formulations and surface energies for these materials vary, each application should be verified through testing. 3M™ Adhesion Promoter K500 is a moisture cured system that is specifically formulated for use with 3M™ Acrylic Foam Tapes for automotive applications.Preparing the Surface Before ApplicationThe bonding surface should be clean and dry. Contaminated surfaces should be cleaned with an untreated, lint-free cloth and 3M™ General Purpose Adhesive Cleaner (Part No. 08984) or 3M™ Prep Solvent 70 (low VOC cleaner, Part No. 08973). Follow this by wiping with another untreated, lint-free cloth and isopropyl alcohol.Easy to ApplyApply a thin, uniform coating to the bonding surface using the minimum amount that will fully coat the surface. This is typically less than 0.002 inch thick. Allow the adhesion promoter to dry thoroughly before applying tape. Although this is usually accomplished in less than one minute, allowing 10 minutes yields the ultimate adhesion. For best results apply tape within 30 minutes after application of primer. Be sure the primed surface remains free from contaminants prior to laminating the tape. For clean-up tasks, 3M Adhesion Promoter K500 can be removed with acetone solvent.Required Equipment for Application3M™Adhesion Promoter K500 can be applied with a felt tip applicator, pressurized flow gun, knurled roller or other similar type applicator. Applicator heads should be cleaned or replaced regularly.Recommended ApplicationsABSTPOEPDMPPTPV/TPE blendsBetter Science for Better Adhesion from 3MSince 1925 when a 3M lab assistant invented masking tape, 3M has been applying science to life -developing adhesive products and technologies that help entire industries and individual businesses worldwide. The work that began with a single 3M engineer now spans decades and generations and all of it goes into each 3M product developed for automotive OEM, like 3M™ Adhesion Promoter K500.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.