A Versatile and Easy to Use Adhesion PromoterFormulated specifically for use with 3M™ Acrylic Foam Tapes, our 3M™ Adhesion Promoter 2262AT promotes a tight, reliable bond when attaching components to painted surfaces in automotive applications. The pre-diluted, ready-to-use acrylic polymer solution is specially formulated for use with 3M automotive attachment tapes, and is excellent for applications using rigid and flexible PVC compounds, ABS, nylon, polyester and high-solids automotive paints. It can be applied by a gravity feed wipe, knurled roller, sprayer or felt-tipped or similar applicator. The liquid primer dries in 5 to 10 seconds for very fast and efficient application. Once the product is dry, it is ready to accept attachment tape. The adhesion promoter can also be cleaned from most surfaces using an acetone solvent or methyl ethyl ketone (MEK). Please note: When using solvents for cleanup, use the precautionary measures recommended in the SDS and on the product label for the solvent. Also, consult local air quality regulations that may regulate solvent and product use.3M™ Adhesion Promoter 2262AT is specifically formulated to be used with 3M™ Acrylic Foam Tapes and 3M™ Acrylic Plus Tapes for automotive applications. Each application should be verified through testing.Recommended ApplicationsSeals and badgesABS partsRigid and flexible PVC partsRaw RIM materialsInjection-molded partsPolyester and nylonFor use with 3M™ Acrylic Foam Tapes and 3M™ Acrylic Plus TapesBetter Science for Better Adhesion from 3MSince 1925 when one of our lab assistants invented masking tape, 3M has been applying science to life - developing adhesive products and technologies that help entire industries and individual businesses worldwide. The work that began with a single 3M engineer now spans decades and generations-' and all of it goes into each of our products developed for automotive OEM and collision repair, like 3M™ Adhesion Promoter 2262AT.