3M™ Mold Remediation Respirator Kit 69097, Large 2 Kits EA/Case
Includes a 3M™ Full Facepiece 6000 and two pairs of 3M™ Particulate Filters 2097, P100, to help reduce exposure to mold and low level organic compounds produced by mold.
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7010316002
-
3M ID70071090214
-
UPC00-51131-52793-0
-
Product Formal Name3M™ Mold Remediation Respirator Kit 69097, Large 2 Kits EA/Case
-
Brand-old3M
-
Case UnitCase of 2
-
Unit of MeasureCase
-
Estimated Lead Time2
-
Grit/MicronMedium
-
SizeL
-
Inventory Status CodeS
-
Technical Informationhttps://multimedia.3m.com/mws/media/133586J/3m-reusable-respirator-inspection-cleaning-storage-procedures.jpg
-
Country of OriginUSA
-
Return PolicyNo Return
-
Box Length (in)10.6
-
Box Width (in)9.9
-
Box Height (in)14.4
- Bullets
-
Bullet 1- full facepiece respirator assembly
- Includes #REF!, Nuisance organic vapor particulate filters
- Large lens for wide field of view
- lightweight, Balanced design
- silicone faceseal for greater comfort and durability
-
- Transportation
-
ECCN Number1A995;COV19
-
Harmonized Tariff Schedule Number9020006000
-
UNSPSC Code46182002
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item134140
-
NMFC Class175.0
-
NMFC Sub00
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint TransportNo Flash Point
-
-
SKU7010316002
-
UPC/ISBN50051131527930
This kit is the simple, one stop solution to help provide respiratory protection during most mold remediation activities such as vacuuming, sanding, removal and disposal. A separate chemical cartridge may be needed for exposure to disinfectants. (See disinfectant MSDS for more information.)
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.