3M™ PELTOR™ Lite-Com Pro II Dynamic Throat Microphone MT90-02, 1 EA/Case
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
Lead Time2
-
Manufacturer3M
-
SAP7000040037
-
3M IDXL001644068
-
UPC40-46719-39793-8
-
Product Formal Name3M™ PELTOR™ Lite-Com Pro II Dynamic Throat Microphone MT90-02, 1 EA/Case
-
BrandPeltor MT
-
Case UnitCase of 100
-
Unit of MeasureEach
-
Part NumberMT90-02
-
Estimated Lead Time2
-
Inventory Status CodeN
-
Country of OriginUSA
-
Return PolicyNo Return
-
Box Length (in)11.7
-
Box Width (in)9
-
Box Height (in)6
- Bullets
-
Bullet 1- Throat microphone for use on 3M™ PELTOR™ Communication Headsets that feature an dynamic microphone
- Can be used as an alternative to the boom microphone
- A practical solution when boom microphones are ineffective or can’t be used, such as when wearing other personal protective equipment or headborne objects
- Picks up vibrations from user’s voice box for voice transmission
- Effective in noisy environments
- Offers stretchable strap with adjustments for different neck sizes
- Plugs into the same auxiliary port as the boom mic
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number8518108030
-
UNSPSC Code46181900
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item061700
-
NMFC Class100.0
-
NMFC Sub06
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint TransportNo Flash Point
-
-
SKU7000040037
-
UPC/ISBN04046719397945
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.