3M™ Solus™ 2000 Series, S2002SGAF-BGR, Gray/Blue-Green Temples, Scotchgard™ Anti-Fog Coating, Gray AF-AS lens, 20ea/cs
Comfortable, stylish eyewear with a vast array of color and lens tint options, the 3M(TM) Solus(TM) 2000 Series provides eye protection with a stylish flare.
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7100203287
-
UPC00-68060-42873-3
-
Product Formal Name3M™ Solus™ 2000 Series, S2002SGAF-BGR, Gray/Blue-Green Temples, Scotchgard™ Anti-Fog Coating, Gray AF-AS lens, 20ea/cs
-
BrandScotchgard, Solus
-
Case UnitCase of 20
-
Unit of MeasureCase(s)
-
Estimated Lead Time2
-
Lens TypeGray AF-AS
-
Lens ColorGray
-
Anti-FogAnti-Fog
-
Scratch ResistantScratch Resistant
-
ColorGray/Blue-Green
-
Inventory Status CodeS
-
Country of OriginTaiwan
-
Return PolicyNo Return
-
Box Length (in)11.8
-
Box Width (in)7.9
-
Box Height (in)9.7
- Bullets
-
Bullet 1Adjustable ratchet temples;Scotchgard™ Anti-Fog Coating resists fogging longer than traditional anti-fog coatings, even after up to 25 washings with water*
*3M internal testing per EN168 test method when compared with traditional anti-fog coatings.;Similar to typical sunglasses, grey lenses are popular in outdoor daytime work environments.;Polycarbonate lenses absorb 99.9% of UVA and UVB rays;Meet the requirements of ANSI Z87.1-2015 Standard as an Impact Rated Spectacle
-
- Transportation
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item156600
-
NMFC Class250.0
-
NMFC Sub03
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint TransportNo Flash Point
-
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.