3M™ Zeta Plus™ U Premium Series Filter Cartridge Z2UA12PD205U, 05U Media Grade, 2 Per Case

Our Zeta Plus™ U & UW Series filters for the power generation industry are offered in two formulations. The U formulation is recommended for use with oils contaminated mainly with carbon particles, and the UW formulation is specifically formulated for use with oils contaminated with both carbon particles and moisture.
Price: $439.16

(Case of 2 Each)

Estimated Lead Time is 200 working days.
  • $439.16
  • Case of 2 - $439.16
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      10.02 lbs
    • SKU
      7000125505
    • UPC/ISBN
      00016145090769
  • Lead Time
    200
  • Manufacturer
    3M
  • SAP
    7000125505
  • 3M ID
    70020067305
  • UPC
    00-16145-09076-9
  • Product Formal Name
    3M™ Zeta Plus™ U Premium Series Filter Cartridge Z2UA12PD205U, 05U Media Grade, 2 Per Case
  • Brand
    Zeta Plus
  • Case Unit
    Case of 2
  • Unit of Measure
    Each
  • Estimated Lead Time
    200
  • Inventory Status Code
    N
  • Technical Information
    https://multimedia.3m.com/mws/media/504087J/zeta-plus-uuw-series-for-fltn-of-insulation-oil-used-sp-sht.jpg
  • Country of Origin
    USA
  • Return Policy
    No Return
  • Box Length (in)
    23.500
  • Box Width (in)
    11.750
  • Box Height (in)
    8.813
  • Bullets
    • Bullet 1
      - Products developed specifically for the filtration of Insulation oil used in power generation
      - Tight 10U & 10UW grades provide reduction of very fine particles
      - Water absorbent formulation provides superior water reduction capabilities (UW Grade)
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      8421290065
    • UNSPSC Code
      47101500
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      069100
    • NMFC Class
      100.0
    • NMFC Sub
      06
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7000125505
  • UPC/ISBN
    00016145090769

Zeta Plus charge-modified filter media uses electrokinetic adsorption to remove contaminants and colloid materials smaller than those filtered by mechanical sieving alone. Zeta Plus™ U & UW Series filter cartridges are used for reconditioning insulating oils in power generation. Two grades of media, 05 and 10, are available: 05 grade provides efficient reduction of particle contaminants in most insulation oil applications, while the 10 grade provides efficient reduction of ultrafine particles. Effective Fine Particle and Moisture Reduction As oil specifications get tighter, finer filtration is required to meet those demands. The 10U formulation was developed to help reduce smaller contaminants such as fine carbon particulate. Water contaminates the dielectric oil either from the atmosphere or breakdown of the oil itself. Water contamination is usually accompanied by particulate contamination, which then increases both the filtration and water reduction workload. Zeta Plus U & UW series formulations help address both problems.Automatic Shut-off upon Saturation The construction of Zeta Plus™ Series 05UW and 10UW cartridges allow it to plug on saturation with water, effectively shutting off flow. This feature is important for two reasons. First, it provides a clearly defined end-point to filter life. Second, the automatic shut-off helps prevent recontamination of the filtrate with water.User-Friendly DesignOptional cartridge reduction baskets are available for manually or mechanically installing and removing cartridges.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.