3M™ Thermally Conductive Acrylic Interface Pad 5589H-15, 240 mm x 20 m x 1.5 mm, 1 per Case
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time95
-
Manufacturer3M
-
SAP7100205588
-
UPC00-51111-90589-5
-
Product Formal Name3M™ Thermally Conductive Acrylic Interface Pad 5589H-15, 240 mm x 20 m x 1.5 mm, 1 per Case
-
Case UnitOrder of 5 Cases of 1
-
Unit of MeasureRoll(s)
-
Product ID5589H
-
Estimated Lead Time95
-
Size21-1/2 in x 22 yd
-
Inventory Status CodeN
-
Country of OriginJapan
-
Return PolicyNo Return
-
Width21-1/2 in
-
Length22 yd
-
Box Length (in)11.4
-
Box Width (in)10.2
-
Box Height (in)10.2
- Bullets
-
Bullet 1- Good softness and conformability to non-flat surfaces
- Excellent compressive stress relaxation
- Non-silicone acrylic elastomer
- Good dielectric performance
- Good surface tack leads to low thermal resistance at surface
- Thickness : 1.0 mm, 1.5 mm
- Excellent durability for long term thermal conductivity and electric insulation stability
-
- Transportation
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item156600
-
NMFC Class070.0
-
NMFC Sub09
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint TransportNo Flash Point
-
-
SKU7100205588
-
UPC/ISBN051111905895
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.