• 0
3M™ Thermally Conductive Acrylic Interface Pad 5550H-05, 240mm x 60m x 0.5mm

3M™ Thermally Conductive Acrylic Interface Pad 5550H-05, 240mm x 60m x 0.5mm

3M™ Thermally Conductive Acrylic Interface Pad 5550H is designed to provide a preferential heat transfer path between heat generating components like integrated circuit (IC) chips and heat spreaders such as aluminum heat sinks. 3M pads 5550H consists of a highly conformable slightly tacky acrylic elastomeric sheet filled with conductive ceramic particles and it's very good softness enables to fill the gap easily.

Price: $1521.10

(Case of 1 Roll(s))

  • $1521.10
    • Case of 1 - $1521.10
Qty:  
OR
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    Learn more
    • Weight
      46.2 lbs
    • SKU
      7100197296
    • UPC/ISBN
      00638060825556
  • Industry
    IB
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7100197296
  • UPC
    06-38060-82555-6
  • Product Formal Name
    3M™ Thermally Conductive Acrylic Interface Pad 5550H-05, 240mm x 60m x 0.5mm
  • Case Unit
    Case of 1
  • Unit of Measure
    Roll(s)
  • Product ID
    5550H
  • Estimated Lead Time
    2
  • Size
    9-1/2 in x 197 ft
  • Inventory Status Code
    N
  • Country of Origin
    Japan
  • Return Policy
    No Return
  • Width
    9-1/2 in
  • Length
    197 ft
  • Box Length (in)
    10.2
  • Box Width (in)
    10.2
  • Box Height (in)
    11.8
  • Bullets
    • Bullet 1
      - Very soft but good handling
      - Good softness and conformability even to non-flat IC surfaces
      - Incorporates a thin firm acrylic layer for good handling
      - Good thermal conductivity and good electrical insulation properties
      - Slight tack allows pre-assembly. Good wettability for better thermal conductivity
      - UL94 V-0 certified (File No, E176845)
  • Transportation
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      157320
    • NMFC Class
      000.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7100197296
  • UPC/ISBN
    00638060825556

3M™ Thermally Conductive Acrylic Interface Pad 5550H has an ultra-soft pad that conforms to uneven substrates, providing excellent wettability to fill gaps for improved thermal performance. The thin, firm, low-tack layer provides easy handling for pre-assembly and die-cutting. This pad provides robust thermal management for applications in a variety of market segments, such as consumer electronics, automotive, LED lighting, medical devices, communication infrastructure, and aerospace & defense.Our family of 3M™ Thermally Conductive Acrylic Interface Pads provide low-outgassing and high-performance solutions compared to silicone. These acrylic pads have no siloxane VOC or oil bleeding, which are associated with silicone products and can often cause device failure. They are lightweight, making them ideal for applications with finer spacing requirements and a small footprint. 3M™ Thermally Conductive Acrylic Interface Pads have good electrical insulation properties to protect against electrical interference and device breakdown.Recommended Applications:Heat transfer between PCB and heat sinkDecrease of compression stress to electronic parts by thermal pad softnessGap filling in electronic devicesChip on film (COF) heat dissipationPower electronic component thermal managementExamples:LED displaysElectric vehicle (EV) batteriesWireless charging unitsSatellite navigationSensorsProcess control equipmentTest & measurement devices

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.