Filters
Categories
-
Abrasives
- Abrasive Wheels
- Abrasive Belts
- Abrasive Discs
- Abrasive Sheets & Rolls
- Belts
- Brushes
- Buffs & Stars
- Buffing & Compounding Pads
- Cartridge Rolls
- Cones
- Cross & Square Pads
- Custom Abrasives
- Discs
- Grain & Powder
- Handheld Abrasives
- Mounted Points
- Precision Dressing Tools
- Roll Dispensers
- Sanding Screens
- Sheets & Rolls
- Specialty Abrasives
- Spiral Bands
- Wheels
- Adhesives
- Adhesives, Sealants & Fillers
- Advanced Materials
- Automotive
- Automotive Parts & Hardware
- Building Materials
- Cleaning Supplies
-
Coatings
- Additives & Catalysts
- Corrosion Protection Coatings
- Dry Guide Coats & Inspection Sprays
- Electrical Resins
- Floor Finishes & Coatings
- Ink, Toner & Process Colors
- Liquid & Stain Repellents
- Lubricants & Penetrants
- Overspray Protection Coatings
- Polishing Compounds
- Primers & Undercoats
- Sprayer Systems
- Communications
- Compounds & Polishes
- Electrical
- Electronics Materials & Components
- Films
- Films & Sheeting
- Filtration & Separation
- Household
- Home & Office
- Insulation
- Lab Supplies & Testing
- Labels
- Lubricants
- Medical
- Office Supplies
- Personal Protective Equipment
- Safety
- Security Systems
- Signage & Marking
-
Tapes
- Adhesion Promoters
- Anti-slip & Grip Tapes
- Barricade & Warning Tapes
- Bonding, Mounting & Transfer Tapes
- Cloth & Duct Tapes
-
Electrical Tapes
- Acetate Cloth Tapes
- Cambric Cloth Tapes
- Conductive Adhesive Transfer Tapes
- Epoxy Tapes
- Filament Reinforced Tapes
- Glass Cloth Electrical Tapes
- Glass Cloth Tapes
- Polyester Electrical Tapes
- Polyester Tapes
- Polyimide Electrical Tapes
- Polyimide Tapes
- PTFE Electrical Tapes
- Rubber Electrical Tapes
- Vinyl Electrical Tapes
- Filament Tapes
- Flexographic Plate Mounting Tapes
- Foam Tapes
- Foil Tapes
- Masking & Paper Tapes
- Membrane Switch Spacers
- Office Tapes
- Packaging Tapes
- Polyester Tapes
- Polyethylene Tapes
- Reclosable Fasteners
- Release Liners
- Sealing Tapes
- Slick Surface Tapes
- Specialty Application Tapes
- Splicing & Tabbing Tapes
- Surface Protective Tapes
- Tape Applicators, Dispensers & Kits
- Thread Sealant Tapes
- Vinyl Tapes
-
Tools & Equipment
- Adhesive Applicators
- Adhesive Scraping Tools & Accessories
- Detection & Monitoring Equipment
- Diluters
- Dispense Units & Valves
- Ditch Clip Application Tools
- Dressing Tools
- Denibbing Products
- Dust Extraction Systems
- Holders & Back-up Pads
- Mandrels & Adapters
- Power Tools
- Dent Removal Tools
- Spray Equipment
- Workstations & Stands
- CLEARANCE SALE
Categories
-
Abrasives
- Abrasive Wheels
- Abrasive Belts
- Abrasive Discs
- Abrasive Sheets & Rolls
- Belts
- Brushes
- Buffs & Stars
- Buffing & Compounding Pads
- Cartridge Rolls
- Cones
- Cross & Square Pads
- Custom Abrasives
- Discs
- Grain & Powder
- Handheld Abrasives
- Mounted Points
- Precision Dressing Tools
- Roll Dispensers
- Sanding Screens
- Sheets & Rolls
- Specialty Abrasives
- Spiral Bands
- Wheels
- Adhesives
- Adhesives, Sealants & Fillers
- Advanced Materials
- Automotive
- Automotive Parts & Hardware
- Building Materials
- Cleaning Supplies
-
Coatings
- Additives & Catalysts
- Corrosion Protection Coatings
- Dry Guide Coats & Inspection Sprays
- Electrical Resins
- Floor Finishes & Coatings
- Ink, Toner & Process Colors
- Liquid & Stain Repellents
- Lubricants & Penetrants
- Overspray Protection Coatings
- Polishing Compounds
- Primers & Undercoats
- Sprayer Systems
- Communications
- Compounds & Polishes
- Electrical
- Electronics Materials & Components
- Films
- Films & Sheeting
- Filtration & Separation
- Household
- Home & Office
- Insulation
- Lab Supplies & Testing
- Labels
- Lubricants
- Medical
- Office Supplies
- Personal Protective Equipment
- Safety
- Security Systems
- Signage & Marking
-
Tapes
- Adhesion Promoters
- Anti-slip & Grip Tapes
- Barricade & Warning Tapes
- Bonding, Mounting & Transfer Tapes
- Cloth & Duct Tapes
-
Electrical Tapes
- Acetate Cloth Tapes
- Cambric Cloth Tapes
- Conductive Adhesive Transfer Tapes
- Epoxy Tapes
- Filament Reinforced Tapes
- Glass Cloth Electrical Tapes
- Glass Cloth Tapes
- Polyester Electrical Tapes
- Polyester Tapes
- Polyimide Electrical Tapes
- Polyimide Tapes
- PTFE Electrical Tapes
- Rubber Electrical Tapes
- Vinyl Electrical Tapes
- Filament Tapes
- Flexographic Plate Mounting Tapes
- Foam Tapes
- Foil Tapes
- Masking & Paper Tapes
- Membrane Switch Spacers
- Office Tapes
- Packaging Tapes
- Polyester Tapes
- Polyethylene Tapes
- Reclosable Fasteners
- Release Liners
- Sealing Tapes
- Slick Surface Tapes
- Specialty Application Tapes
- Splicing & Tabbing Tapes
- Surface Protective Tapes
- Tape Applicators, Dispensers & Kits
- Thread Sealant Tapes
- Vinyl Tapes
-
Tools & Equipment
- Adhesive Applicators
- Adhesive Scraping Tools & Accessories
- Detection & Monitoring Equipment
- Diluters
- Dispense Units & Valves
- Ditch Clip Application Tools
- Dressing Tools
- Denibbing Products
- Dust Extraction Systems
- Holders & Back-up Pads
- Mandrels & Adapters
- Power Tools
- Dent Removal Tools
- Spray Equipment
- Workstations & Stands
- CLEARANCE SALE
New arrivals
-
3M™ Super 77™ CA Multipurpose Spray Adhesive, Low VOC
- $180.98
Case of 12 - $180.98 -
25% OFF - 3M™ Silver Cut-Off Wheel, 87465, T1, 4.5 in x .045 in x 7/8 in, 50 per case
- $87.57
Case of 1 - $87.57 -
25% OFF - 3M™ Diamond Grade™ Emergency Vehicle Markings 983-23 Fluorescent Yellow/Green, 51 mm x 45.7 m
- $74.20
Case of 1 - $74.20 -
Bondo® Fast Dry Filler FD-PT-ES, 14 oz (396.89 g), 8 per case
- $86.39
Case of 8 - $86.39
Top News
- Jan 30, 2019 Industrial General Store Company Appreciation Giveaway Box Sign up for the company appreciation giveaway box by entering your details and enjoy more perks than just winning a contest.
- Jan 30, 2019 Industrial General Store The Industrial General Store is PCI compliant so that shoppers can safely complete their purchases.
Motor Lead Splices
Sort by:
Recommended
-
3M™ Motor Lead Pigtail Splice 5316, 5-8 kV, 8-4 AWG (feeder), 10-4 AWG (motor lead), 1/case
3M™ Motor Lead Inline Splicing Kits 5316-5319 Series are designed for splicing motor lead cables to incoming feeder cables, including the accommodation of inline connections at 1000 volts and less. The splice’s main component, the slip on splice cover, is made from EPDM rubber. A mastic strip is used for the moisture seal.- $140.48
Case of 1 - $140.48 -
3M™ Motor Lead Pigtail Splice 5317, 5-8 kV, 2-1/0 AWG (feeder), 4-1/0 AWG (motor lead), 1/case
3M™ Motor Lead Inline Splicing Kits 5316-5319 Series are designed for splicing motor lead cables to incoming feeder cables, including the accommodation of inline connections at 1000 volts and less. The splice's main component, the slip on splice cover, is made from EPDM rubber. A mastic strip is used for the moisture seal.- $157.45
Case of 1 - $157.45 -
3M™ Motor Lead Pigtail Splice 5318, 5-8 kV, AWG-250 kcmil (feeder), AWG-250 kcmil (motor lead), 1/case
3M™ Motor Lead Inline Splicing Kits 5316-5319 Series are designed for splicing motor lead cables to incoming feeder cables, including the accommodation of inline connections at 1000 volts and less. The splice’s main component, the slip on splice cover, is made from EPDM rubber. A mastic strip is used for the moisture seal.- $220.07
Case of 1 - $220.07 -
3M™ Motor Lead Pigtail Splice 5319, 5-8 kV, 4/0 AWG-500 kcmil (feeder), 4/0 AWG-500 kcmil (motor lead), 1/case
3M™ Motor Lead Inline Splicing Kits 5316-5319 Series are designed for splicing motor lead cables to incoming feeder cables, including the accommodation of inline connections at 1000 volts and less. The splice's main component, the slip on splice cover, is made from EPDM rubber. A mastic strip is used for the moisture seal.- $360.63
Case of 1 - $360.63 -
3M™ Motor Lead Pigtail Splice 5301, 1 kV, 1-Hole Lug Connection, Feeder: 10-4 AWG , Motor Lead: 12-4 AWG , 1/Case
3M™ Motor Lead Pigtail Splicing Kits 5300 Series are designed for splicing motor lead cables to incoming feeder cables, including the accommodation of pigtail (stub) connections at 1000 volts and less. The splice's main component, the slip-on lug cover, is made from EPDM rubber. Mastic strips are used for the moisture seal. These kits are designed to be used with copper compression, one-hole lugs. After being crimped onto the cables, the lugs are bolted together in a pigtail configuration, then insulated and sealed with the 3M Motor Lead Splicing Kit. Each kit makes three splices and contains the necessary materials (except lugs) needed to make three splices. The lugs must be purchased separately. 3M™ Scotchlok™ Copper Compression Lugs 30000 Series, or other UL listed copper lugs, can be used. Kit contents include: €¢ (3) Pigtail lug covers €¢ (3) Mastic sealing strips €¢ (3) Locking pins (kits 5302€“5304 only) €¢ (3) Tubes of silicone grease €¢ (1) Instruction sheet- $66.57
Case of 1 - $66.57 -
3M™ Motor Lead Pigtail Splice 5302, 1 kV, 1-Hole Lug Connection, Feeder: 2-1/0 AWG , Motor Lead: 4-1/0 AWG , 1/Case
3M™ Motor Lead Pigtail Splicing Kits 5300 Series are designed for splicing motor lead cables to incoming feeder cables, including the accommodation of pigtail (stub) connections at 1000 volts and less. The splice's main component, the slip-on lug cover, is made from EPDM rubber. Mastic strips are used for the moisture seal. These kits are designed to be used with copper compression, one-hole lugs. After being crimped onto the cables, the lugs are bolted together in a pigtail configuration, then insulated and sealed with the 3M Motor Lead Splicing Kit. Each kit makes three splices and contains the necessary materials (except lugs) needed to make three splices. The lugs must be purchased separately. 3M™ Scotchlok™ Copper Compression Lugs 30000 Series, or other UL listed copper lugs, can be used. Kit contents include: €¢ (3) Pigtail lug covers €¢ (3) Mastic sealing strips €¢ (3) Locking pins (kits 5302€“5304 only) €¢ (3) Tubes of silicone grease €¢ (1) Instruction sheet- $81.42
Case of 1 - $81.42 -
3M™ Motor Lead Pigtail Splice 5303, 1 kV, 1-Hole Lug Connection, Feeder: 1/0 AWG-250 kcmil , Motor Lead: 1/0-AWG-250 kcmil , 1/Case
3M™ Motor Lead Pigtail Splicing Kits 5300 Series are designed for splicing motor lead cables to incoming feeder cables, including the accommodation of pigtail (stub) connections at 1000 volts and less. The splice's main component, the slip-on lug cover, is made from EPDM rubber. Mastic strips are used for the moisture seal. These kits are designed to be used with copper compression, one-hole lugs. After being crimped onto the cables, the lugs are bolted together in a pigtail configuration, then insulated and sealed with the 3M Motor Lead Splicing Kit. Each kit makes three splices and contains the necessary materials (except lugs) needed to make three splices. The lugs must be purchased separately. 3M™ Scotchlok™ Copper Compression Lugs 30000 Series, or other UL listed copper lugs, can be used. Kit contents include: €¢ (3) Pigtail lug covers €¢ (3) Mastic sealing strips €¢ (3) Locking pins (kits 5302€“5304 only) €¢ (3) Tubes of silicone grease €¢ (1) Instruction sheet- $105.99
Case of 1 - $105.99 -
3M™ Motor Lead Pigtail Splice 5304, 1 kV, 1-Hole Lug Connection, Feeder: 250-500 kcmil , Motor Lead: 4/0 AWG-500 kcmil , 1/Case
3M™ Motor Lead Pigtail Splicing Kits 5300 Series are designed for splicing motor lead cables to incoming feeder cables, including the accommodation of pigtail (stub) connections at 1000 volts and less. The splice's main component, the slip-on lug cover, is made from EPDM rubber. Mastic strips are used for the moisture seal. These kits are designed to be used with copper compression, one-hole lugs. After being crimped onto the cables, the lugs are bolted together in a pigtail configuration, then insulated and sealed with the 3M Motor Lead Splicing Kit. Each kit makes three splices and contains the necessary materials (except lugs) needed to make three splices. The lugs must be purchased separately. 3M™ Scotchlok™ Copper Compression Lugs 30000 Series, or other UL listed copper lugs, can be used. Kit contents include: €¢ (3) Pigtail lug covers €¢ (3) Mastic sealing strips €¢ (3) Locking pins (kits 5302€“5304 only) €¢ (3) Tubes of silicone grease €¢ (1) Instruction sheet- $132.74
Case of 1 - $132.74 -
3M™ Motor Lead Pigtail Splice 5300, 1 kV, 1-Hole Lug Connection, Feeder: 14-10 AWG , Motor Lead: 16-1/0-AWG , 1/Case
3M™ Motor Lead Pigtail Splicing Kits 5300 Series are designed for splicing motor lead cables to incoming feeder cables, including the accommodation of pigtail (stub) connections at 1000 volts and less. The splice's main component, the slip-on lug cover, is made from EPDM rubber. Mastic strips are used for the moisture seal. These kits are designed to be used with copper compression, one-hole lugs. After being crimped onto the cables, the lugs are bolted together in a pigtail configuration, then insulated and sealed with the 3M Motor Lead Splicing Kit. Each kit makes three splices and contains the necessary materials (except lugs) needed to make three splices. The lugs must be purchased separately. 3M™ Scotchlok™ Copper Compression Lugs 30000 Series, or other UL listed copper lugs, can be used. Kit contents include: €¢ (3) Pigtail lug covers €¢ (3) Mastic sealing strips €¢ (3) Locking pins (kits 5302€“5304 only) €¢ (3) Tubes of silicone grease €¢ (1) Instruction sheet- $42.34
Case of 1 - $42.34 -
3M™ Motor Lead Pigtail Splice 5321, 5-8 kV, 8-4 AWG (feeder), 10-4 AWG (motor lead), 1/case
3M™ 5300 Series Motor Lead Pigtail Splice Kit is perfect to use with copper compression lugs. This shielded and non-shielded splice kit is suitable for splicing motor lead cables to the incoming feeder cables. This kit is rated for 5/8 kV-rated applicatio- $263.62
Case of 1 - $263.62 -
3M™ Motor Lead Pigtail Splice 5322, 5-8 kV, 2-1/0 AWG (feeder), 4-1/0 AWG (motor lead), 1/case
3M™ 5300 Series Motor Lead Pigtail Splice Kit is perfect to use with copper compression lugs. This shielded and non-shielded splice kit is suitable for splicing motor lead cables to the incoming feeder cables. This kit is rated for 5/8 kV-rated applicatio- $324.47
Case of 1 - $324.47 -
3M™ Motor Lead Pigtail Splice 5323, 5-8 kV, AWG-250 kcmil (feeder), AWG-250 kcmil (motor lead), 1/case
3M™ 5300 Series Motor Lead Pigtail Splice Kit is perfect to use with copper compression lugs. This shielded and non-shielded splice kit is suitable for splicing motor lead cables to the incoming feeder cables. This kit is rated for 5/8 kV-rated applicatio- $385.29
Case of 1 - $385.29