3M™ Motor Lead Pigtail Splice 5302, 1 kV, 1-Hole Lug Connection, Feeder: 2-1/0 AWG , Motor Lead: 4-1/0 AWG , 1/Case

3M™ Motor Lead Pigtail Splicing Kits 5300 Series are designed for splicing motor lead cables to incoming feeder cables, including the accommodation of pigtail (stub) connections at 1000 volts and less. The splice's main component, the slip-on lug cover, is made from EPDM rubber. Mastic strips are used for the moisture seal. These kits are designed to be used with copper compression, one-hole lugs. After being crimped onto the cables, the lugs are bolted together in a pigtail configuration, then insulated and sealed with the 3M Motor Lead Splicing Kit. Each kit makes three splices and contains the necessary materials (except lugs) needed to make three splices. The lugs must be purchased separately. 3M™ Scotchlok™ Copper Compression Lugs 30000 Series, or other UL listed copper lugs, can be used. Kit contents include: €¢ (3) Pigtail lug covers €¢ (3) Mastic sealing strips €¢ (3) Locking pins (kits 5302€“5304 only) €¢ (3) Tubes of silicone grease €¢ (1) Instruction sheet
Price: $78.29

(Case of 1 Kit)

  • $78.29
  • Case of 1 - $78.29
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      0.647 lbs
    • SKU
      7000005806
    • UPC/ISBN
      00054007122647
  • Industry
    IB
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7000005806
  • 3M ID
    80008006423
  • UPC
    00-54007-12264-7
  • Product Formal Name
    3M™ Motor Lead Pigtail Splice 5302, 1 kV, 1-Hole Lug Connection, Feeder: 2-1/0 AWG , Motor Lead: 4-1/0 AWG , 1/Case
  • Brand-old
    3M
  • Case Unit
    Case of 1
  • Unit of Measure
    Kit
  • Estimated Lead Time
    2
  • Color-old
    Black
  • Inventory Status Code
    S
  • Data Sheet
    http://multimedia.3m.com/mws/media/41589O
  • Technical Information
    https://multimedia.3m.com/mws/media/41589J/motor-lead-splicing-kits-5300-series.jpg
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xM82Zo82emv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Applications
    Cross Linked Polyethylene Cable
  • Return Policy
    No Return
  • Box Length (in)
    7.8
  • Box Width (in)
    5.9
  • Box Height (in)
    3.4
  • Bullets
    • Bullet 1
      - Splices motor lead cables to incoming feeder cables
      - Designed to use with copper compression, 1-hole lugs
      - Slip-on lug cover is made of durable EPDM rubber
      - For pigtail (stub) connections at 1000V or less
      - Includes 3 each of pigtail lug covers, mastic sealing strips, and tubes of silicone grease, plus an instruction sheet
      - CSA Certified and RoHS 2011/65/EU Compliant‎
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      8546900000
    • UNSPSC Code
      31270000
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      061205
    • NMFC Class
      110.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7000005806
  • UPC/ISBN
    00054007122647

3M™ 5300 Series Motor Lead Pigtail Splice Kit contains 3 each of pigtail lug covers, mastic sealing strips, tubes of silicone grease, and locking pins plus an instruction sheet. It is designed for use with copper compression, 1-hole lugs. Its slip-on lug cover has EPDM rubber construction while the mastic strips in the kit seal moisture. After being crimped onto the cables, use this kit to insulate and seal the lugs that are bolted together in a pigtail configuration. CSA Certified and RoHS 2011/65/EU Compliant.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.