• 0
3M™ Motor Lead Pigtail or V-Stub Splice 5383, 5-8 kV, Feeder: 1/0 AWG-250 kcmil, Motor Lead: AWG-250 kcmil , 1/Case

3M™ Motor Lead Pigtail or V-Stub Splice 5383, 5-8 kV, Feeder: 1/0 AWG-250 kcmil, Motor Lead: AWG-250 kcmil , 1/Case

3M™ Motor Lead Pigtail Splicing Kits 5380 Series are designed for splicing motor lead cables to incoming feeder cables. These kits are removable and reusable. These kits can accommodate pigtail (stub) connections, 5/8 kV shielded and non-shielded feeders. The splice’s main component, the slip-on splice cover, is made from EPDM rubber. Mastic is used for the moisture seal on the pigtail kits. The kits utilize a high dielectric constant (K) stress control termination for the feeder cable’s electrical stress control. These kits are designed to be used with copper compression lugs. After being crimped onto the cables, the lugs are bolted together, then insulated and sealed with the 3M Motor Lead Splicing Kits. Each kit contains all the necessary materials (except lugs) needed to make three splices. The lugs must be purchased separately. 3M™ Scotchlock™ Copper Compression Lugs 30000 Series, or other UL listed copper lugs, can be used. Kit contents include: • (3) Lug covers • (3) Cold Shrink terminations • (12) Mastic sealing strips • (3) Copper tape strips • (3) Cleaning kits • (6) Tubes of silicone grease • (3) Cold Shrink jacket tubes • (3) Constant force springs • (3) Cable ties • (3) Ground straps • (1) Instruction sheet
Price: $772.74

(Case of 1 Kit)

  • $772.74
    • Case of 1 - $772.74
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    Learn more
    • Weight
      4.2 lbs
    • SKU
      7000133145
    • UPC/ISBN
      00051128559536
  • Industry
    IB
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7000133145
  • 3M ID
    80611425416
  • UPC
    00-51128-55953-6
  • Product Formal Name
    3M™ Motor Lead Pigtail or V-Stub Splice 5383, 5-8 kV, Feeder: 1/0 AWG-250 kcmil, Motor Lead: AWG-250 kcmil , 1/Case
  • Case Unit
    Case of 1
  • Unit of Measure
    Kit
  • Estimated Lead Time
    2
  • Inventory Status Code
    S
  • Data Sheet
    https://multimedia.3m.com/mws/media/370585O/marketing-motor-lead-product.pdf&fn=Motorleadproductflyer.pdf
  • Technical Information
    https://multimedia.3m.com/mws/media/354393O/3mtm-motor-lead-pigtail-splicing-kits-5380-series.pdf&fn=DS 5380 Series.pdf
  • Country of Origin
    USA
  • Return Policy
    No Return
  • Box Length (in)
    12.9
  • Box Width (in)
    7.5
  • Box Height (in)
    5.9
  • Bullets
    • Bullet 1
      - Designed for use with 30000 Series copper compression lugs or other UL Listed copper lugs
      - Perfect for use with shielded and non-shielded cables
      - Rated for 5/8 kV applications
      - The lug or splice cover is made of EPDM rubber to resist punctures and abrasion damage
      - Includes 6 tubes of silicone grease, 3 cold shrink jacket tubes, 3 cable ties, 3 ground straps and 1 instruction sheet
      - Withstands a temperature range of 194 to 266 degrees F (90 to 130 degrees C)
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      8546900000
    • UNSPSC Code
      31270000
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT RESTRICTED, AS PER 49 CFR 171.4, MARINE POLLUTANT EXCEPTION
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT RESTRICTED, AS PER 49 CFR 171.4, MARINE POLLUTANT EXCEPTION
    • NMFC Item
      061205
    • NMFC Class
      110.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT RESTRICTED, AS PER SPECIAL PROVISION A197, ENVIRONMENTALLY HAZARDOUS SUBSTANCE EXCEPTION
    • International Maritime Organization
      NOT RESTRICTED, AS PER IMDG CODE 2.10.2.7, MARINE POLLUTANT EXCEPTION
    • Flashpoint Transport
      144°F/62°C
  • SKU
    7000133145
  • UPC/ISBN
    00051128559536

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.