• 0
3M™ Motor Lead Inline Splice 5332, 5-8 kV, 2-1/0 AWG (feeder), 4-1/0 AWG (motor lead), 1/Case

3M™ Motor Lead Inline Splice 5332, 5-8 kV, 2-1/0 AWG (feeder), 4-1/0 AWG (motor lead), 1/Case

3M™ Motor Lead Inline Splicing Kits 5300 Series are designed for splicing motor lead cables to incoming feeder cables. 3M™ Motor Lead Splicing Kits 5331-5334 can accommodate inline connections, 5/8 kV shielded and non-shielded feeders. The splice’s main component, the slip-on splice cover, is made from EPDM rubber. A mastic strip is used for the moisture seal on the inline kits. These kits are designed to be used with copper compression, one- or two-hole lugs. After being crimped onto the cables, the lugs are bolted together in an inline configuration, then insulated and sealed with the 3M Motor Lead Splicing Kits. Each kit contains all the necessary materials (except lugs) needed to make three splices. The lugs must be purchased separately. 3M™ Scotchlok™ 30000 Series copper compression lugs, or other UL listed copper lugs, can be used. In addition, 3M™ Motor Lead Splicing Kits 5331-5334 require vinyl tape which can also be purchased separately. For inline splice kits: The longitudinal space required for assembly will be approximately 2 (splice cover length), to allow space for the splice while the connection is being made. Kit contents include: • (3) Cold Shrink tubes • (12) Adapters • (3) Rolls Scotch® Stress Control Tape 2220 • (3) Bags of solvent cleaning cloths • (6) Tubes of silicone grease • (3) Rolls Scotch® Linerless Rubber Splicing Tape 130C • (3) Instruction sheets

Price: $347.39

(Case of 1 Kit)

Estimated Lead Time is 20 working days.
  • $347.39
    • Case of 1 - $347.39
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    Learn more
    • Weight
      3.5 lbs
    • SKU
      7000132542
    • UPC/ISBN
      00054007122760
  • Industry
    IB
  • Lead Time
    20
  • Manufacturer
    3M
  • SAP
    7000132542
  • 3M ID
    80610735237
  • Product Formal Name
    3M™ Motor Lead Inline Splice 5332, 5-8 kV, 2-1/0 AWG (feeder), 4-1/0 AWG (motor lead), 1/Case
  • Case Unit
    Case of 1
  • Unit of Measure
    Kit
  • Estimated Lead Time
    20
  • Inventory Status Code
    N
  • Technical Information
    https://multimedia.3m.com/mws/media/41589J/motor-lead-splicing-kits-5300-series.jpg
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xM82ZPx_xnv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Return Policy
    No Return
  • Box Length (in)
    18.8
  • Box Width (in)
    6.3
  • Box Height (in)
    8.6
  • Bullets
    • Bullet 1
      - Features shielded, non-shielded cables
      - Designed for splicing motor lead cables to the incoming feeder cables
      - Suitable for use with 30000 Series copper compression lugs or other UL Listed copper lugs
      - 0.3 to 0.51-in O.D. insulation
      - Accommodates wire size of 10 to 4 AWG
      - Rated for 5/8 kV applications
      - Includes 3 rolls Scotch® stress-control tape 2220, 12 adapters, 3 instruction sheets and more
      - Withstands temperatures of 194 degrees F (90 degrees C)
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      8546900000
    • UNSPSC Code
      31270000
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT RESTRICTED, AS PER 49 CFR 171.4, MARINE POLLUTANT EXCEPTION
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT RESTRICTED, AS PER 49 CFR 171.4, MARINE POLLUTANT EXCEPTION
    • NMFC Item
      061205
    • NMFC Class
      110.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT RESTRICTED, AS PER SPECIAL PROVISION A197, ENVIRONMENTALLY HAZARDOUS SUBSTANCE EXCEPTION
    • International Maritime Organization
      NOT RESTRICTED, AS PER IMDG CODE 2.10.2.7, MARINE POLLUTANT EXCEPTION
    • Flashpoint Transport
      No Flash Point
  • SKU
    7000132542
  • UPC/ISBN
    00054007122760

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.