• 0
3M™ Cold Shrink Quick Splice Low Voltage QSLV-M 2-500, Non-shielded, 1 kV, 10/Case

3M™ Cold Shrink Quick Splice Low Voltage QSLV-M 2-500, Non-shielded, 1 kV, 10/Case

3M™ Cold Shrink Quick Splice Low Voltage QSLV-M are open-ended tubular rubber sleeves with sealing mastic on each end which are factory expanded and assembled onto a unique three-core system. Two cores, one on each end, are removed after the QSLV-M insulator has been centered over an inline connector, allowing the ends of the tube to shrink and form a water-resistant seal. The third, center segment of the core remains inside the cold shrink tube, acting as a support structure. Sizing of the cores and tube, along with the sealing mastic on each end, is designed to accommodate the variance in connectors and connector crimping techniques and final dimensions without degrading the seal and insulating characteristics of the EPDM rubber tube, while also making core removal easy. Two diameter sizes will cover a range of 1 kV or less cable from 8 AWG through 1000 kcmil for copper and 8 AWG through 500 kcmil for aluminum conductors with crimped connectors. In aerial applications where intense UV radiation will be common and visual inspection is not possible, it is recommended to overwrap the tubing with Scotch® Super 33+™ Vinyl Electrical Tape or Scotch® Self-Fusing Silicone Rubber Electrical Tape 70. Note: Insulator may be used on cable sizes outside of the recommended range provided both cables are within the insulation O.D. range, and the connector meets the dimensional requirements shown in the table.
Price: $467.16

(Case of 10 Each)

  • $467.16
    • Case of 10 - $467.16
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    Learn more
    • Weight
      6.4 lbs
    • SKU
      7000058805
    • UPC/ISBN
      00051128572375
  • Industry
    IB
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7000058805
  • 3M ID
    80611438377
  • UPC
    00-51128-57237-5
  • Product Formal Name
    3M™ Cold Shrink Quick Splice Low Voltage QSLV-M 2-500, Non-shielded, 1 kV, 10/Case
  • Case Unit
    Case of 10
  • Unit of Measure
    Each
  • Product ID
    QSLV-M(2-500)
  • Estimated Lead Time
    2
  • Color
    Black
  • Inventory Status Code
    S
  • Technical Information
    https://multimedia.3m.com/mws/media/502396J/3m-cold-shrink-quick-splice-low-voltage-qslv-m-series-data-sheet.jpg
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xm8teNxmemv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Return Policy
    No Return
  • Box Length (in)
    16.3
  • Box Width (in)
    11.7
  • Box Height (in)
    6.6
  • Bullets
    • Bullet 1
      - Rubber sleeve with sealing mastic provides a water-resistant sealing
      - Factory-expanded for easy installation
      - For direct-bury, secondary low-voltage, non-shielded cable splices
      - Rated for up to 1 kV applications
      - Splices both aluminum and copper conductors
      - RoHS 2011/65/EU Compliant and ANSI Certified
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      8546900000
    • UNSPSC Code
      32000000
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      051140
    • NMFC Class
      100.0
    • NMFC Sub
      06
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7000058805
  • UPC/ISBN
    00051128572375

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.