3M™ Cold Shrink Inline Splice 5743, 5/8 kV, 350-1000 kcmil (Cu) or 350-750 kcmil (Al), Cable Insul. O.D. 0.90-2.10, 1/Case

The 3M™ Cold Shrink Splicing Products are designed using the proprietary cold shrink delivery system developed by 3M. Products are supplied prestretched on a removable core for efficiency and ease of installation. 3M™ Cold Shrink Splices 5740 Series are used for single conductor, non-shielded 5/8 kV cables. Each kit is a cold shrink design and contains enough material to insulate three splices. Connectors are not included and must be ordered separately. Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
Price: $323.29

(Case of 1 Kit)

  • $323.29
  • Case of 1 - $323.29
Qty:  
OR
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      4.9 lbs
    • SKU
      7000140699
    • UPC/ISBN
      00054007494935
  • Industry
    IB
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7000140699
  • 3M ID
    80610592299
  • UPC
    00-54007-49493-0
  • Product Formal Name
    3M™ Cold Shrink Inline Splice 5743, 5/8 kV, 350-1000 kcmil (Cu) or 350-750 kcmil (Al), Cable Insul. O.D. 0.90-2.10, 1/Case
  • Case Unit
    Case of 1
  • Unit of Measure
    Kit
  • Estimated Lead Time
    2
  • Inventory Status Code
    S
  • Technical Information
    https://multimedia.3m.com/mws/media/41630J/cold-shrink-rubber-splicing-kits-5740-series-inline.jpg
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xM82ZmxtUmv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Return Policy
    No Return
  • Box Length (in)
    18.8
  • Box Width (in)
    6.3
  • Box Height (in)
    8.6
  • Bullets
    • Bullet 1
      - Designed for use with 10000, 11000 and 20000 Series inline compression connectors
      - The rubber mastic filler removes time-consuming penciling of cable insulation
      - Perfect for splicing non-shielded, wet/dry solid dielectric power cables
      - Rated for 5/8 kV applications
      - RoHS 2011/65/EU Compliant
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      8536908585
    • UNSPSC Code
      31270000
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT RESTRICTED, AS PER 49 CFR 171.4, MARINE POLLUTANT EXCEPTION
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT RESTRICTED, AS PER 49 CFR 171.4, MARINE POLLUTANT EXCEPTION
    • NMFC Item
      061205
    • NMFC Class
      110.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT RESTRICTED, AS PER SPECIAL PROVISION A197, ENVIRONMENTALLY HAZARDOUS SUBSTANCE EXCEPTION
    • International Maritime Organization
      NOT RESTRICTED, AS PER IMDG CODE 2.10.2.7, MARINE POLLUTANT EXCEPTION
    • Flashpoint Transport
      No Flash Point
  • SKU
    7000140699
  • UPC/ISBN
    00054007494935

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.