3M™ Finesse-it™ Polish - Extra Fine, 06002, Gallon, 4 per case
3M™ Finesse-it™ Polish - Extra Fine is part of a line of specially designed compounds and polishes to be used on OEM and baked refinish paints to remove sand scratches or to remove swirl marks from previously compounded areas and is designed to produce best results when used with an air or electric buffer equipped with 3M™ Finesse-it™ buffing pads.
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7000000630
-
3M ID60440240285
-
UPC00-51131-06002-9
-
Product Formal Name3M™ Finesse-it™ Polish - Extra Fine, 06002, Gallon, 4 per case
-
Brand-oldFinesse-It
-
BrandFinesse-It
-
Case UnitCase of 4
-
Unit of MeasureBottle
-
Estimated Lead Time2
-
GradeExtra Fine
-
Grit/MicronExtra Fine
-
Diameter (Metric)3.78 mm
-
Color-oldWhite
-
Inventory Status CodeS
-
Data Sheethttps://multimedia.3m.com/mws/media/995222O/3m-palm-buffer-28769-flyer-pdf.pdf&fn=61-5002-8382-7_LR.pdf
-
Instructions/Manualhttps://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xmx_GO8mUNv70k17zHvu9lxtD7SSSSSS--
-
Country of OriginUSA
-
Product FormCompound
-
Return PolicyNo Return
-
Box Length (in)13.7
-
Box Width (in)10.5
-
Box Height (in)11.6
- Bullets
-
Bullet 1- removes swirl marks and micro grade sanding scratches
- Ideal for spot repair on OEM clear coats
- Wax and silicone free formula
-
- Transportation
-
ECCN Number1C995
-
Harmonized Tariff Schedule Number3405900000
-
UNSPSC Code31191500
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item033440
-
NMFC Class055.0
-
NMFC Sub00
-
Transport Protective ServiceMAINTAIN TEMP ABOVE 32F (0C)
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint Transport>200°F/93°C
-
-
SKU7000000630
-
UPC/ISBN00051131060029
3M™ Finesse-it™ Polish - Extra Fine works well for buffing wood, automotive OEM, marine, and aerospace coatings.This material also produces superior results in top coat rubbing and other woodworking applications requiring satin, semi-gloss, and high gloss finishes. This same material can also be used in our Finesse-it™ Trizact™ Paint Repair System for AOEM paint and clear coats. Finish results are dependent on the combination of coating type, polish, and tools used.3M™ Finesse-it™ products are a line of our specially engineered abrasives, compounds, polishes, and buffing pads to be used on OEM and baked refinish paints to remove defects, sand scratches, or swirl marks on a variety of painted surfaces. 3M Finesse-it products are an integral part of a 3M recommended buffing system for repairing surface defects to clear coats, lacquered wood, solid surfaces, gelcoat, powder coat, industrial paint, acrylic, and glass.
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.