3M™ High Power Spray Gun Cleaner, 26689, 15 oz (426 g), 6 per case

Our 3M™ High Power Spray Gun Cleaner is a low VOC aerosol specifically formulated for removing waterborne and solvent-based coatings from metals, plastic and composite surfaces. This spray gun cleaner meets SCAQMD Rule 1171 requirements.
Price: $39.61

(Case of 6 Canister)

  • $39.61
  • Case of 6 - $39.61
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      7.475 lbs
    • SKU
      7100148476
    • UPC/ISBN
      00051131266896
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7100148476
  • 3M ID
    60455091904
  • UPC
    00-51131-26689-6
  • Product Formal Name
    3M™ High Power Spray Gun Cleaner, 26689, 15 oz (426 g), 6 per case
  • Case Unit
    Case of 6
  • Unit of Measure
    Canister
  • Part Number
    26689
  • Estimated Lead Time
    2
  • Inventory Status Code
    S
  • Country of Origin
    USA
  • Return Policy
    No Return
  • Box Length (in)
    8.3
  • Box Width (in)
    5.6
  • Box Height (in)
    10.2
  • Bullets
    • Bullet 1
      - Helps reduce the use of cleaning solvents
      - Compatible for cleaning waterborne and solvent-based coatings
      - Aerosol cleaner is low VOC – less than 25 g/L (meets SCAQMD Rule 1171)
      - Designed for use on metal spray equipment or composite/plastic components
      - Excellent for cleaning spray gun equipment
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      3814005090
    • UNSPSC Code
      25000000
    • United States Department Of Transportation Ground US DOT, 49 CFR
      LIMITED QUANTITY
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      UN1950, AEROSOLS, 2.1, LIMITED QUANTITY
    • NMFC Item
      043940
    • NMFC Class
      085.0
    • NMFC Sub
      02
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      UN1950, AEROSOLS, FLAMMABLE, 2.1
    • International Maritime Organization
      UN1950, AEROSOLS, 2.1, LIMITED QUANTITY
    • Flashpoint Transport
      No Flash Point
  • SKU
    7100148476
  • UPC/ISBN
    00051131266896

Cleanest Disposable Cup SystemEvery PPS™ Series 2.0 lid features a quarter-turn lid locking system to help reduce paint build-up and possible contamination. Additionally, each lid and liner kit contains a new hard cup which also features universal mixing ratios built into the cup, eliminating the need for separate inserts and helping ensure the most accurate mix possible.Reduce Material Waste by Mixing in the Cup3M™ PPS™ Series 2.0 makes it even easier to mix directly in the cup. If you’re mixing on a scale, use the “max fill” notation on each cup to fit the maximum amount. Cups include a clear access window to help you see how much material is left while spraying. The window also allows you to hold the liner for easier, cleaner lid removal. This is especially useful during refills or tinting.Improved Fluid Flow for More Consistent Paint ApplicationOur 3M™ PPS™ Series 2.0 Lids feature a domed geometry that allows up to 3 oz (90mL) of material below the filter during on-demand spraying. This reduces sputter and other inconsistencies in spray performance. Lids also feature a wider spout for improved fluid flow. A built-in full-diameter filter delivers the highest quality filtration – no assembly needed.More Confidence in the Connection to Your GunA new adapter design provides a four-point connection and a wider 360° platform to ensure a stable, reliable lid-to-spray-gun connection. Larger sealing plugs do more than just seal. For instance, you can turn the cup upside down and use the new sealing plug as a base for temporary sealing and protecting, helping keep the built-in filter wet and reducing the need for replacement lids.A System for Both Solvent-Based and Waterborne ProductsEvery lid features a built-in full diameter filter available in 200 micron or 125 micron mesh. Be sure to consult the paint or coatings manufacturer for the recommended filter mesh size.Use the Right Size Cup for Every RepairOur PPS™ 2.0 Spray Cup System is available in 5 sizes: 3 oz (90mL), 6.8 oz (200mL), 13.5 oz (400mL), 22 oz (650mL) and 28 oz (850mL). Using the right size cup for every repair not only reduces your cost per lid and liner, it can reduce the likelihood of overmixing.Reduce Solvent Usage by up to 70%After spraying, the painter can use the sealing plug to seal and protect the paint or coating for later use or simply discard the lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in accordance with local government requirements. Use a small amount of solvent for cleaning the spray gun and the PPS™ Adapter. Shops using PPS™ Series 2.0 often experience a 70% reduction in cleaning solvent usage. Most guns can be cleaned with less than 3 oz. of solvent.Your Spray Gun Functions at any Angle, Even Upside DownBecause PPS™ Series 2.0 is a closed system, you can spray in any orientation to a full 360 degrees. This allows the painter to spray consistently at 90° to the part, no matter how the part is positioned. It makes material transfer more consistent, limits paint overspray and reduces paint consumption. Reduces the Chance of Contamination Between JobsBecause the painter uses a new disposable lid and liner for each mix, there is less risk of outside contamination. Using a fresh lid and liner with each paint job, rather t

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.

Customers who bought this product also bought

Customers who viewed this product bought