3M™ Fire Barrier Sealant IC 15WB+, Yellow, 10.1 fl oz Cartridge, 12/case
Engineered to form a monolithic seal after drying, 3M™ Fire Barrier Sealant IC 15WB+ is a yellow, one-part, gun-grade, intumescent firestop sealant that provides up to 3-hour fire protection in tested and listed systems. This helps prevent the spread of fire, smoke and noxious gas, while also acting as an acoustic barrier to help minimize noise transfer.
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7100011413
-
3M ID98040055091
-
UPC00-51115-16557-3
-
Product Formal Name3M™ Fire Barrier Sealant IC 15WB+, Yellow, 10.1 fl oz Cartridge, 12/case
-
Brand-old3M
-
Case UnitCase of 12
-
Unit of MeasureEach
-
Product ID15WB+
-
Estimated Lead Time2
-
Volume10.1 fl oz
-
ColorYellow
-
Color-oldYellow
-
Inventory Status CodeS
-
Data Sheethttps://multimedia.3m.com/mws/media/175359O/3m-fire-barrier-sealant-ic-15wb-flyer.pdf&fn=FB_Sealant_IC_15WB_HR_Bleeds_R2.pdf
-
Technical Informationhttps://multimedia.3m.com/mws/media/207329J/3m-fire-barrier-sealant-ic-15wb-technical-data-sheet.jpg
-
Instructions/Manualhttps://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00x4Y_Go8mBOv70k17zHvu9lxtD7SSSSSS--
-
Country of OriginUSA
-
Return PolicyNo Return
-
Box Length (in)8.1
-
Box Width (in)6.1
-
Box Height (in)11.9
- Bullets
-
Bullet 1- Firestop tested for through penetration applications for up to 3 hours in accordance with ASTM E 814 (UL 1479) and CAN/ULC S115
- Sealant designed to help minimize sound transfer
- Water-based and paintable sealant provides easy application and clean-up
- Exceptional adhesion for long-term performance
- Applied with conventional caulking equipment with excellent caulk rate
- Sag-resistant properties offer clean application as well as strong adhesion
- Sealant is re-enterable and repairable
- Fire resistance tested for static construction joint systems in accordance with ASTM E 1966 (UL 2079)
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number3214100010
-
UNSPSC Code46191604
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item050155
-
NMFC Class050.0
-
NMFC Sub04
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint TransportNo Flash Point
-
-
SKU7100011413
-
UPC/ISBN00051115165573
Establish a Strong Firestop BarrierDesigned to prevent the spread of fire, smoke and noxious gas, 3M™ Fire Barrier Sealant IC 15WB+ is a one-part, gun-grade, latex-based, intumescent firestop sealant. This firestop sealant provides up to 3-hour fire protection in accordance with ASTM E 814 (UL 1479) and CAN/ULC S115. In addition, this product is fire resistance tested for static construction joint systems in accordance with ASTM E 1966 (UL 2079). This sealant has been formulated to form a monolithic firestop seal that also helps minimize sound transfer, acting as a barrier to airborne sound transmission (STC-Rating of 54 when tested in a STC 54-rated wall assembly).Recommended ApplicationsHVAC ducts and ventsMetallic and non-metallic, including CPVC pipesBlank openingsSingle and bundled cablesInsulated pipePipe and cable through-PenetrationsBuswaysCombosRated wall, floor and floor-ceiling assembliesStatic construction jointsFormulated for Protection and Ready for InspectionWe've formulated 3M™ Fire Barrier Sealant IC 15WB+ to be easily cleaned-up with water. This sealant is paintable, as well as re-enterable and repairable. It is a halogen-free sealant that features exceptional adhesion, excellent caulk rate and sag-resistance. In addition, inspectors can instantly recognize 3M™ Fire Barrier Sealant IC 15WB+ by its distinctive yellow color.3M™ Fire Barrier Sealant IC 15WB+ firestops through penetrations passing through fire-rated floor, floor/ceiling or wall assemblies, as well as other fire-rated interior building partitions and assemblies (e.g. static construction joints or blank openings). In addition, the unique intumescent property of this material allows 3M™ Fire Barrier Sealant IC 15WB+ to expand and help maintain a firestop penetration seal for up to 3 hours of fire exposure. 3M™ Fire Barrier Sealant IC 15WB+ bonds to most construction substrates, including: gypsum wallboard, concrete, metals, wood, plastic and cable jacketing. This sealant meets the intent of LEED® VOC environmental regulations, International Building Code (IBC) and other key life safety building code requirements.Reliable and Affordable Fire ProtectionEffective and easy to install, 3M™ Fire Barrier Sealant IC 15WB+ is part of our family of fire protection products that offer the broadest, long-lasting solutions for a variety of commercial, industrial and residential applications. As a trusted leader in the fire protection industry, 3M offers a broad line of affordable products designed to meet the most demanding firestop requirements. Find the solution you need from the industry-preferred line of fire protection products.
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.