Bondo® Scratch and Rock Chip Repair Kit Clamshell, 31590, 6 kits per case
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
Lead Time2
-
Manufacturer3M
-
SAP7100190985
-
3M ID60455103394
-
UPC00-51131-31590-7
-
Product Formal NameBondo® Scratch and Rock Chip Repair Kit Clamshell, 31590, 6 kits per case
-
BrandBondo
-
Case UnitCase of 6
-
Unit of MeasureKit(s)
-
Part Number31590
-
Estimated Lead Time2
-
Inventory Status CodeS
-
Country of OriginUSA
-
Return PolicyNo Return
-
Box Length (in)14.6
-
Box Width (in)5
-
Box Height (in)10
- Bullets
-
Bullet 1- Complete solution to quickly and easily repair deep scratches and rock chips
- Kit includes Bondo® Glazing and Spot Putty, Bondo® Spreader and 3M™ Sandpaper (180 and 320 grit)
- This inclusive kit comes with everything you need to properly perform repairs and get the area ready for priming and a final coat of paint.
- Provides a 3-minute work time and is sandable in 30 minutes
- Kit contains enough product to repair multiple scratches and rock chips; Repairs 80 square inches of surface
- One-part application requires no mixing
- Can be used on metal, fiberglass and wood as well as sanded and primed or painted surfaces.
- Shrinks very little over time, helping to ensure lasting repairs without rework
- Dispenses easily and efficiently right from the tube
- This kit is excellent for use as part of a complete body repair system from 3M and Bondo®
-
- Transportation
-
United States Department Of Transportation Ground US DOT, 49 CFRLIMITED QUANTITY
-
United States Department Of Transportation Vessel US DOT, 49 CFRUN1139, COATING SOLUTION, 3, II, LIMITED QUANTITY, +017C
-
NMFC Item050075
-
NMFC Class055.0
-
NMFC Sub00
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationUN1139, COATING SOLUTION, 3, II
-
International Maritime OrganizationUN1139, COATING SOLUTION, 3, II, LIMITED QUANTITY, +017C
-
Flashpoint Transport>63F/17C
-
-
SKU7100190985
-
UPC/ISBN00051131315907
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.