Bondo® Body Repair Kit BRKIT-2PK-ES, Ready Mix Pouches, 2 oz, 6/Case (Case of 6) SKU 7100322371

This Bondo® Body Repair Kit contains everything you need to make same day repairs to dents, rust holes up to 3", scratches, and more on vehicle bodies and panels. Along with step-by-step instructions, this kit contains two ready-mix pouches (Bondo Original and Bondo Fiberglass), self-adhesive body patch, and spreader. These pre-measured packets offer a hassle-free application process, ensuring accurate proportions for optimal results. This fast-curing kit shapes in minutes and is specially formulated to be non-shrinking, providing a seamless and durable finish for your repairs. Bondo® Body Repair Kit Ready Mix Pouch Directions: 1) Clean all surfaces with soap and water followed by a low VOC compliant cleaner. Allow to dry. 2) If repairing fiberglass, sand the damaged area with 80 grit sandpaper or a 36 grit disc. Cut damaged or cracked pieces of fiberglass away with a saw blade. Sand the area 1” beyond the repair to roughen the surface. Clean again with a low VOC compliant cleaner. If repairing metal, sand with 80 grit sandpaper to remove all paint, primer, and rust down to bare metal. Sand 1-2 inches beyond damaged area. Clean again with a low VOC compliant cleaner. 3) Apply the included Bondo® Self Adhesive Body Patch to the repair area to cover holes or rust out areas larger than ½” in diameter, cutting to size as needed. Overlap the opening with the screen by 1” on all sides. 4) Use the Bondo® Fiberglass filler pouch first. Separate the hardener and filler pouches by tearing down the perforation line. 5) Knead the filler pouch and hardener pouch to ensure components are ready for use. 6) Tear the filler pouch open and use the spreading tool to push the entire pouch contents onto a non-porous mixing surface. 7) Tear the hardener pouch open and use the spreading tool to push the entire pouch contents onto the non-porous mixing surface next to the filler. 8) Use spreading tool to mix hardener and filler components together to achieve a uniform color. When product is mixed, the working time is 3-4 minutes. 9) Spread an initial thin layer of the mixed fiberglass filler over the repair area using firm pressure to ensure maximum adhesion. Apply additional layers of fiberglass filler as needed. Allow the fiberglass filler to cure 30 minutes.  10) Rough shape the fiberglass filler with 80 grit sandpaper as needed. Repeat steps 5 through 8 using the Bondo® Original Filler pouch, applying a topcoat of this material over the area repaired with fiberglass filler. Allow 20 minutes to cure. 11) Rough shape the filler as needed with 80 grit sandpaper and final finish with 180 grit or finer. Featheredge the repair. Wait 45 minutes and apply 2-3 coats of primer to cover the repair area. 12) Apply Bondo® Glazing and Spot Putty to fill in small imperfections and re-prime with 2-3 coats. Follow paint manufacturer’s recommendation for priming and final finishing. For best results apply at 45°F (7°C) or above. Clean tools with acetone or lacquer thinner. Help line: 1-800-494-3552