3M™ Reinforced Body Filler, 05877, 276 mL DMS Cartridge, 6 per case

3M™ Reinforced Filler for DMS is a two-component, resin-rich filler that offers easier mixing and dispensing through the 3M™ Dynamic Mixing System. The system efficiently mixes the filler and hardener so that it is ready to use immediately upon being dispensed, saving automotive technicians time and effort by eliminating hand mixing.
Price: $194.60

(Case of 6 Each)

  • $194.60
  • Case of 6 - $194.60
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      8 lbs
    • SKU
      7000120099
    • UPC/ISBN
      00051131058774
  • Industry
    IB
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7000120099
  • 3M ID
    60455066310
  • UPC
    00-51131-05877-4
  • Product Formal Name
    3M™ Reinforced Body Filler, 05877, 276 mL DMS Cartridge, 6 per case
  • Brand-old
    3M
  • Catalog Product Category
    Body Filler, Glaze and Related
  • Case Unit
    Case of 6
  • Unit of Measure
    Each
  • Estimated Lead Time
    2
  • Inventory Status Code
    S
  • Data Sheet
    http://multimedia.3m.com/mws/media/738335O
  • Technical Information
    https://multimedia.3m.com/mws/media/738335J/tds-05877-3m-reinforced-filler-rev-2.jpg
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xmxtvnY_xPv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Consistency
    Paste
  • Return Policy
    No Return
  • Box Length (in)
    11.7
  • Box Width (in)
    9.8
  • Box Height (in)
    8
  • Bullets
    • Bullet 1
      - Two-component, resin rich filler for high building, increasing repair strength
      - Versatile formula adheres to most automotive substrates
      - Milled fiberglass in filler adds reinforcing strength
      - Dual cartridge system designed for use with the 3M™ Dynamic Mixing System
      - System mixes hardener and filler to a perfect ratio every time
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      3214100090
    • UNSPSC Code
      25000000
    • United States Department Of Transportation Ground US DOT, 49 CFR
      LIMITED QUANTITY
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      UN3269, POLYESTER RESIN KIT, 3, III, LIMITED QUANTITY, +032C
    • NMFC Item
      050075
    • NMFC Class
      055.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      UN3269, POLYESTER RESIN KIT, 3, III
    • International Maritime Organization
      UN3269, POLYESTER RESIN KIT, 3, III, LIMITED QUANTITY, +032C
    • Flashpoint Transport
      89°F/32°C
  • SKU
    7000120099
  • UPC/ISBN
    00051131058774

Excellent Adhesion on Most Automotive SubstratesOur 3M™ Reinforced Filler for DMS contains milled fiberglass and is packaged in a dual cartridge system. Our reinforced filler offers excellent adhesion to steel, galvanized steel, aluminum, E coat, SMC and FRP. It provides additional strength when deeper fill and gap spanning capability are needed. This filler is ideal for weld seams, SMC, and FRP.A Convenient Way to Mix Hardener and Filler3M™ Reinforced Filler for DMS streamlines the process of mixing filler and hardener. Instead of manually mixing filler and hardener on a board with a spreader, the 3M™ Dynamic Mixing System delivers a perfect ratio of hardener and filler. The filler may be applied to the vehicle straight from the dispenser with the simple touch of a trigger on the 3M™ Dynamic Mixing System applicator. For the typical auto body shop, this system maximizes productivity and efficiency.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.

3M DMS Dynamic Mixing System Set Up