3M™ Scotch-Weld™ Epoxy Adhesive DP420, Black, 200 mL Duo-Pak, 12/case
3M™ Scotch-Weld™ Epoxy Adhesive DP420 is a toughened, two-part epoxy structural adhesive that provides good strength along with high impact and fatigue resistance to meet demanding bonding challenges. 3M™ Scotch-Weld Epoxy Adhesive DP420 can replace mechanical fasteners, screws, rivets and spot welds in many applications.
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7100007956
-
3M ID62277838306
-
UPC00-21200-41530-2
-
Product Formal Name3M™ Scotch-Weld™ Epoxy Adhesive DP420, Black, 200 mL Duo-Pak, 12/case
-
Brand-oldScotch-Weld
-
BrandScotch-Weld
-
Case UnitCase of 12
-
Unit of MeasureEach
-
Product IDDP420
-
Estimated Lead Time2
-
Volume200 mL
-
ColorBlack
-
Color-oldBlack
-
Inventory Status CodeS
-
Data Sheethttp://multimedia.3m.com/mws/media/66998O
-
Technical Informationhttps://multimedia.3m.com/mws/media/79082J/joint-design-for-structural-adhesives-technical-bulletin.jpg
-
Instructions/Manualhttps://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xlYt1Oxmemv70k17zHvu9lxtD7SSSSSS--
-
Country of OriginUSA
-
Product FormCartridge
-
IndustriesComposite
-
ApplicationsBonding
-
Adhesive TypeEpoxy
-
Return PolicyNo Return
-
Box Length (in)10.2
-
Box Width (in)6.7
-
Box Height (in)8.4
- Bullets
-
Bullet 1- High peel and shear strength maintains lasting bond at high and low temperatures
- Toughened for impact and fatigue resistance
- 20 minute work life provides time for positioning and adjustment
- Adhesive cures at room temperature, making it a convenient and easy to use solution for challenging applications
- Reaches high strength quickly with heat cure
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number3506105000
-
UNSPSC Code31200000
-
United States Department Of Transportation Ground US DOT, 49 CFRLIMITED QUANTITY
-
United States Department Of Transportation Vessel US DOT, 49 CFRUN2735, AMINES, LIQUID, CORROSIVE, N.O.S., (4,7,10-TRIOXATRIDECANE-1,13-DIAMINE), 8, II, LIMITED QUANTITY
-
NMFC Item004620
-
NMFC Class060.0
-
NMFC Sub02
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationUN2735, AMINES, LIQUID, CORROSIVE, N.O.S., (4,7,10-TRIOXATRIDECANE-1,13-DIAMINE), 8, II
-
International Maritime OrganizationUN2735, AMINES, LIQUID, CORROSIVE, N.O.S., (4,7,10-TRIOXATRIDECANE-1,13-DIAMINE), 8, II, LIMITED QUANTITY
-
Flashpoint Transport>340°F/171°C
-
-
SKU7100007956
-
UPC/ISBN00021200415302
When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing. High Peel and Shear Strength Maintains Lasting Bond at High and Low Temperatures 3M™ Scotch-Weld™ Epoxy Adhesive DP420 maintains bond strength at high and low temperatures and can withstand paint bake operations up to 400°F for 60 minutes. It works well on a variety of substrates such as metals, ceramics, wood, glass, many composites and plastics, and is an excellent indoor bonding agent for joining, gluing, potting, panel bonding, and structural bonding. 3M™ Scotch-Weld™ Epoxy Adhesive DP420 Off-White meets the requirements for UL 94 HB. Recommended Applications Small joint assembly Heavy-duty mounting assembly Metalworking Carbon fiber epoxy bonding 20 Minute Work Life Provides Time for Positioning and Adjustment 3M™ Scotch-Weld™ Epoxy Adhesive DP420 reaches handling strength in approximately two hours and is fully cured in 24 hours (at 72°F/22°C.) The mix ratio is 2:1 and provides a 20 minute work life, providing time to adjust for desired fit prior to curing. This adhesive is available in a variety of package sizes and can be dispensed in several ways to meet the demands of the user and the job. Toughened for Impact and Fatigue Resistance 3M™ Scotch-Weld ™ Epoxy Adhesive DP420 is appropriate for applications that will face tough environmental challenges. Formulated to provide strong adhesion for the long-term, this resilient epoxy is another way 3M meets and exceeds the demands of even the toughest applications. What are Epoxy Adhesives? Epoxy adhesives are part of the class of adhesives called "structural adhesives," which also includes polyurethane, acrylic, cyanoacrylate and others. Epoxies are formulated as liquid reactive polymers that undergo a chemical reaction when mixed and then cure to form a solid plastic material. Once the two parts are mixed in their specified ratio, they begin the curing process and offer a limited work life (open time) where the adhesive can be applied and the two surfaces positioned as needed. This work life lasts anywhere from a few minutes to several hours. These structural adhesives provide high shear and peel strengths, depending on the formula, and better heat and chemical resistance than other common adhesives. In general, epoxy adhesives have the highest overall strength and offer the best performance and most resistance to high temperatures, solvents and outdoor weathering. Epoxy adhesives are widely used in building and home construction; aircraft and automobile manufacturing; bicycle, boat, golf clubs, ski and snowboard assembly as well as a host of home use and other applications. They are used virtually anywhere high-strength bonds are needed along with resistance to environmental conditions. These adhesives are popular for their ease of use, mechanical strength and chemical resistance. Formulations can be created to make epoxies flexible or rigid, transparent or opaque, quick setting or slow setting. The versatility with which epoxy adhesives can be formulated helps meet almost any requirement for bonding wood, metal, glass, stone and various plastics. Industrial uses for epoxies range widely and, in addition to adhesives, include coatings and composite materials like carbon fiber and glass-reinforced composites. They are the preferred choice due to their ability to flow and conform to the work area, strong adhesion, chemical and heat resistance and exceptional mechanical and electrical insulating properties.
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.