3M™ Fast Tack Water Based Adhesive 1000NF, Purple, 1 Gallon Can, 4/case
3M™ Fast Tack Water Based Adhesive 1000NF is a unique, water-based adhesive specially designed to deliver an effective combination of fast, heat resistant bonding, repositionability, and high ultimate strength. Our adhesive is non-flammable, polychloroprene-free, and has zero VOCs (per EPA test method 24).
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7100007793
-
3M ID62423475300
-
UPC00-51115-64679-9
-
Product Formal Name3M™ Fast Tack Water Based Adhesive 1000NF, Purple, 1 Gallon Can, 4/case
-
Brand-old3M
-
Case UnitCase of 4
-
Unit of MeasureEach
-
Product ID1000NF
-
Estimated Lead Time2
-
VolumeGallon
-
ColorPurple
-
Color-oldPurple
-
Inventory Status CodeS
-
Data Sheethttps://multimedia.3m.com/mws/media/847886O/3mtm-fast-tack-water-based-adhesive-1000nf-flyer.pdf&fn=Fast Tack 1000NF Flyer- Low resolution_R3.pdf
-
Technical Informationhttps://multimedia.3m.com/mws/media/838285J/3mtm-fast-tack-water-based-adhesive-1000nf-data-page.jpg
-
Instructions/Manualhttps://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xmx_voxmGOv70k17zHvu9lxtD7SSSSSS--
-
Country of OriginUSA
-
Product FormBulk
-
IndustriesFurniture
-
ApplicationsBond Countertop Laminate to Particle Board
-
Application MethodBrush
-
Return PolicyNo Return
-
Box Length (in)15.8
-
Box Width (in)9.3
-
Box Height (in)12.6
- Bullets
-
Bullet 1- Solventless, ONE-part adhesive requires No mixing for safe, easy handling
- stable bond Provides good heat resistance for long-term endurance
- bonds quickly for immediate handling strength
- low overspray and High coverage Minimizes waste
- bonds a wide variety of substrates with High temperature resistance to meet a wide variety of needs
- Available in purple and neutral colors
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number3506915000
-
UNSPSC Code31200000
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item004620
-
NMFC Class060.0
-
NMFC Sub02
-
Transport Protective ServiceMAINTAIN TEMP ABOVE 40F (5C)
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint Transport>200°F/93°C
-
-
SKU7100007793
-
UPC/ISBN00051115646799
A Faster Bonding Time3M™ Fast Tack Water Based Adhesive 1000NF bonds quickly while achieving handling strength in approximately one minute or less. Along with its fast action, the potential for one-surface application also increases productivity while using less product.Adheres to Many MaterialsBy formulating an adhesive that is 48% solids, 3M™ Fast Tack Water Based Adhesive 1000NF provides up to three times more coverage than solvent based adhesives. It adheres to many types of flexible foam, latex foams, fabric, polyester fiberfill, canvas, wood, plywood, particleboard, and many plastic and metal surfaces. It is certified to GREENGUARD® Product Emission Standard For Children and Schools for low-emitting interior building materials.Recommended ApplicationsHigh-temperature insulation applicationsPipe wrappingAcoustical Insulation installationArchitectural and decorative panelingMolded foam bondingAdhesive can be applied by spray, brush or rollerWhether it is being sprayed, brushed or rolled on, the application of your 3M™ adhesive is a straightforward process. Start by carefully applying your adhesive to your surface until you've formed a uniform coat. Using an overlapping pattern, the application of one coat should prove sufficient for most surfaces. Effective adhesive coverage is accomplished when 80% or more of the surface is covered. Some substrates, including porous materials, may require an additional coat. In order to apply additional adhesive, simply wait until the existing adhesive becomes dry to the touch, and then proceed with the application of the additional coat.
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.