3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810, Tan, 200 mL Duo-Pak, 12/case
3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810 is a toughened two-part, room-temperature curing acrylic adhesive specially formulated to bond oily metals, plastics, and other surfaces. With lower odor and non-flammable properties, 3M™ Scotch-Weld™ Acrylic Adhesive DP810 contributes to a safer work environment compared to typical acrylic adhesives.
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7000121267
-
3M ID62329838304
-
UPC00-21200-31311-0
-
Product Formal Name3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810, Tan, 200 mL Duo-Pak, 12/case
-
Brand-oldScotch-Weld
-
BrandScotch-Weld
-
Case UnitCase of 12
-
Unit of MeasurePack
-
Product IDDP810
-
Estimated Lead Time2
-
Volume200 mL
-
ColorTan
-
Color-oldTan
-
Inventory Status CodeS
-
PositionBest
-
Data Sheethttp://multimedia.3m.com/mws/media/66280O
-
Technical Informationhttps://multimedia.3m.com/mws/media/79082J/joint-design-for-structural-adhesives-technical-bulletin.jpg
-
Instructions/Manualhttps://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xlYtBM821Mv70k17zHvu9lxtD7SSSSSS--
-
Country of OriginJapan
-
Product FormEach
-
IndustriesConstruction
-
Adhesive TypeAcrylic
-
Adhesion Strength480 oz/in
-
Return PolicyNo Return
-
Box Length (in)10.3
-
Box Width (in)6.8
-
Box Height (in)8.5
- Bullets
-
Bullet 1- Low odor adhesive is ideal for any setting where harsh fumes or flammability are an issue
- Provides high shear and peel strength and is toughened for impact resistance
- 10 minute work life and 20 minute handling strength
- Bonds oily metals with minimal surface prep
- Bonds most plastics, composites and metals
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number3506990000
-
UNSPSC Code12000000
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT RESTRICTED, AS PER 49 CFR 171.4, MARINE POLLUTANT EXCEPTION
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT RESTRICTED, AS PER 49 CFR 171.4, MARINE POLLUTANT EXCEPTION
-
NMFC Item004620
-
NMFC Class060.0
-
NMFC Sub02
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT RESTRICTED, AS PER SPECIAL PROVISION A197, ENVIRONMENTALLY HAZARDOUS SUBSTANCE EXCEPTION
-
International Maritime OrganizationNOT RESTRICTED, AS PER IMDG CODE 2.10.2.7, MARINE POLLUTANT EXCEPTION
-
Flashpoint Transport201°F/94°C
-
-
SKU7000121267
-
UPC/ISBN00021200313110
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.