3M™ Impact Resistant Structural Adhesive, 57333, 450 ml DMS Cartridge, 2 per case

3M™ Impact Resistant Structural Adhesive (IRSA) is formulated for true automotive OEM specified structural bonding applications, excellent for collision absorption in steel structures and advanced lightweight aluminum alloys. This two part epoxy adhesive delivers extended worktimes – up to 1 hour – and can be rapidly heat cured. The adhesive changes from silver to purple as the adhesive cures.

Price: $272.19

(Case of 2 Each)

Return Policy

Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.

Learn more

- Weight
  2.7 lbs
- SKU
  7100050352
- UPC/ISBN
  00076308573331
Industry
IB
Lead Time
2
Manufacturer
3M
SAP
7100050352
3M ID
60455083455
UPC
00-76308-57333-1
Product Formal Name
3M™ Impact Resistant Structural Adhesive, 57333, 450 ml DMS Cartridge, 2 per case
Case Unit
Case of 2
Unit of Measure
Each
Estimated Lead Time
2
Volume
450 mL
Inventory Status Code
S
Technical Information
https://multimedia.3m.com/mws/media/1467016J/07333-irsa-technical-data-sheet.jpg
Instructions/Manual
https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xmxm9PYtxmv70k17zHvu9lxtD7SSSSSS--
Country of Origin
USA
Return Policy
No Return
Box Length (in)
7.2
Box Width (in)
7
Box Height (in)
8.3
Bullets
- Bullet 1
  - Higher impact strength versus traditional bonding adhesives
  - Recommended by many OEMs
  - Provides corrosion protection with lifetime warranty
  - Room temperature curing (accelerated curing with heat)
  - can be weld bonded or rivet bonded within working time
  - Adheres to a wide variety of properly prepared steel and aluminum substrates
  - dispenses silver, color changes to purple to indicate proper mixing and curing process has begun
  - has excellent shelf life opened or unopened, reducing unused Product replacement costs
Transportation
- ECCN Number
  EAR99
- Harmonized Tariff Schedule Number
  3506105000
- UNSPSC Code
  25000000
- United States Department Of Transportation Ground US DOT, 49 CFR
  LIMITED QUANTITY
- United States Department Of Transportation Vessel US DOT, 49 CFR
  UN2735, AMINES, LIQUID, CORROSIVE, N.O.S., (BIS(3-AMINOPROPYL) ETHER OF DIETHYLENE GLYCOL, METHYLENEDI(CYCLOHEXYLAMINE)), 8, II, LIMITED QUANTITY
- NMFC Item
  004620
- NMFC Class
  060.0
- NMFC Sub
  02
- Transport Protective Service
  PROTECTIVE SERVICE NOT REQUIRED
- International Air Transport Association
  UN2735, AMINES, LIQUID, CORROSIVE, N.O.S., (BIS(3-AMINOPROPYL) ETHER OF DIETHYLENE GLYCOL, METHYLENEDI(CYCLOHEXYLAMINE)), 8, II
- International Maritime Organization
  UN2735, AMINES, LIQUID, CORROSIVE, N.O.S., (BIS(3-AMINOPROPYL) ETHER OF DIETHYLENE GLYCOL, METHYLENEDI(CYCLOHEXYLAMINE)), 8, II, LIMITED QUANTITY
- Flashpoint Transport
  219°F/104°C

SKU
7100050352
UPC/ISBN
00076308573331

A Structural Adhesive for Automotive SubstratesEngineered to withstand much higher impact vs. traditional bonding adhesives, 3M™ Impact Resistant Structural Adhesive (IRSA) is excellent for true OEM specified automotive structural applications. It adheres to properly prepared automotive substrates including mild steel, high strength steel and automotive aluminum alloys - vital as OEMs strive to achieve high strength in increasingly lightweight structures. Two part epoxy adhesive is recommended for all weld bonded and rivet bonded joints when specified by an OEM. It provides an extended work time - as long one hour - and cures rapidly with heat (30 minutes at 80C/175F). Adhesive applies in a silver color and changes to purple as it cures, indicating when the process has begun.Impact Resistance and More3M™ IRSA is designed to absorb collision energy forces and delivers increased torsional rigidity for OEM specified automotive structures. It allows for spot welding (form squeeze type) in an uncured state, typically up to three hours after application. Properly applied adhesive will seal joints completely, and perform when exposed to very hot and cold temperatures. Its corrosion inhibiting formula delivers lifetime corrosion protection. The cured adhesive can also help decrease NVH in the vehicle.3M™ Impact Resistant Structural Adhesive is available in 200 mL cartridges for smaller jobs, and in 450 mL cartridges for use with the 3M™ Dynamic Mixing System.About the 3M™ Dynamic Mixing SystemWith the Dynamic Mixing System (DMS), 3M has created a method for mixing adhesives, sealers and fillers that saves time and helps ensure the proper mixing of two part for

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.

3M DMS Dynamic Mixing System Set Up